Lantronix Xpress-Pro SW 92000 User Manual - Front Panel Display
2:Product Overview
XPress-Pro 92000 SW User Guide
6
Alarms for power and port failure by relay output.
Operating voltage and Max. current consumption: 12VDC @ 0.99A, 24VDC @
0.55A, 48VDC @ 0.39A. Power consumption: 18.72W Max.
Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC
JACK with 124-240VAC external power supply.
Supports Din-rail mounting installation.
Front Panel Display
LED
State
Indication
POWER
Steady
Switch is properly connected to power and turned on.
PWR1
PWR2
(Green)
Off
Switch is not connected to power and is turned off.
FAULT
Steady
Power failure occurred.
Port failure occurred (when port fault alarm dip switch is enabled).
FAULT
(Red)
Off
Power failure is not occurred.
Port failure is not occurred (when port fault alarm dip switch is enabled).
3. Port fault alarm dip switch is disabled.
10/100TX or 100FX
Steady
A valid network connection established.
LNK stands for LINK.
LNK/ACT
(Green)
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Light solid yellow for a port transferring at 100Mbps.
100
(Yellow)
Off
The port is transferring at 10Mbps If this LED is dark.