Lantronix Xpress-Pro SW 94000 Quick Installation Manual - page 3
Other manuals for Xpress-Pro SW 94000:
User Manual
Manual is about: Lantronix Xpress-Pro SW 94000: User Guide
of
3
3
Assembly, Startup, and Dismantling
Assembly: Place the switch on the DIN rail from above using the slot. Push the front of the switch toward the mounting surface until it audibly
snaps into place.
Startup: Connect the supply voltage to start up the switch via the terminal block (or DC JACK).
Dismantling: Pull out the lower edge and then remove the switch from the DIN rail.