Owner’s manual vbd 1600mp pll synthesizer stereo radio with compact disc player digital.
2 installation notes: • choose the mounting location where the unit will not interfere with the normal driving function of the driver. • before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • use o...
3 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5 x 25mm) 5. Screw 6. Strap be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain washer removing the unit 1. Frame 2. Release frame key insert the release ring key into th...
4 wiring connection green green/black grey grey/black violet violet/black main unit white white/black front lch speaker rear lch speaker front rch speaker rear rch speaker rch red lch white (grey) rear rca cable rch red lch white (brown) front rca cable antenna connector red yellow black choke box b...
5 operation fig. 3 fig. 2 fig. 1 4 5 14 8 23 22 21 20 13 16 17 9 7 18 15 6 1 2 10 3 19 11 12.
6 general operation • on/off/illuminate as show in fig. 1, press the hidden wireframe to turn on the unit, the front panel’s state will change into fig. 2. Press /ill button (9) shortly to control the brightness of vfd. Press it for several seconds to turn off the unit and the state will change into...
7 • reset reset button (19) is placed on the panel and must be activated with either a ball point pen or thin metal object. The reset button is to be activated for the following reasons: - initial installation of the unit when all wiring is completed. - all the function buttons do not operate. - err...
8 cd operation • disc play gently insert a compact disc with the label side facing up into the disc slot (5). The disc is then automatically loaded into the unit and starts playing with the first track of the disc. The digital display will indicate the track number. Then you can press (eject) button...
9 mp3 operation during mp3 operation, these buttons serve the followings. 1. “searching track directly” in digital audio cd. 2. “searching file name” in digital audio cd. 3. “searching file or directory” by file directory structure in digital audio cd. Ams button is assigned as digital audio mode se...
Remote control handset control & function keys 1. Power = power on/off button 2. Mod (7) = mode button (s, t, u, 7 for mp3 operation) 3. S (sel) = select button (character shift right for mp3 operation) 4. Dsp (0) = display button (_, –, +, 0 for mp3 operation) 5. Bnd (enter) = band select button (e...
11 specification general power supply requirements : dc 12 volts, negative ground chassis dimensions : 178 (w) x 155 (d) x 50 (h) tone controls - bass (at 100 hz) : ± 10 db - treble (at 10 khz) : ± 10 db maximum output power : 4 x 60 watts current drain : 15 ampere (max.) cd pla yer signal to noise ...
Trouble shooting before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom cause solution no power. The car ignition is not on. If the power supply is properly connected to the car accesso...
