Lapierre Sitandgo Owner's Manual - 2 Drivetrain

41

2 Drivetrain 

2

1

 Rear derailleur

This is one of the most important component parts of your 

bicycle. It must be properly adjusted in order to offer optimal 

performance and to prolong its lifespan. If you have additional 

questions that are not answered in the manual, please ask your 

authorized Lapierre 

™

 dealer for more information.

To minimize resistance and wear, the chainrings, chain and cogs 

should all be as aligned as possible.

Normally, the procedures described in this manual should have 

been completed before you receive your bike.

However, if at some point you do need to make adjustments, 

please follow the steps below : 

1  Loosen the cable anchor bolt so that the derailleur is free to move.  

2  Adjust the inner and outer limits, as in the drawing (p 40). 

3  Tighten the cable by pulling on it and secure it using the cable 

anchor bolt. If necessary, you can further adjust with the barrel 

adjuster located on the derailleur.

Test 1

Test 2

GB

II— Settings

For your safety, respect the torque 

specifications of the different 

components.

Check your bike before and after every 

ride for play or vibrations, which will help 

identify if a part is not tightened correctly 

or needs replaced.