Lapierre Sitandgo Owner's Manual - page 41

Warning ! If you cannot achieve smooth and quiet gear shifting 

using these steps, please consult your Lapierre 

™ 

authorized 

dealer, who can check the different elements as well as the 

derailleur hanger.

2

2

 Front derailleur

As with the rear derailleur, the front derailleur has also been 

adjusted before you acquire your bike. If you need to make 

further adjustments, please follow the steps below :

Position

The derailleur is attached to the bike by tightening the seat tube 

clamp bolt. By loosening this bolt, you can move the derailleur 

vertically on the seat tube.

In order for the front derailleur to be in the optimal position, the 

outer plate should be 1mm to 3mm above and parallel to the 

large chainring.

Once you have adjusted the position of the front derailleur, 

you can retighten the screw. Please respect the torque 

specifi cations (p. 43). As with the rear derailleur, it is possible 

to adjust the outer (A) and inner (B) limits of the front derailleur 

with the adjustment screws.

II— Settings

Set-up

Set-up

Set-up

Set-up