Laser AO-DIGICAM08 User Manual - page 8
AO-DIGICAM08
USER MANUAL
7
Indoor Light Setting
If the camera is using indoors the frequency of the camera should be set to match that of
power system used in your area.
1. Press the Function button until
or
is displayed on the LCD.
2. This is the current frequency setting of the camera.
3. To change the frequency, press the Shutter Button within 5 seconds.
Note: Generally Australia, New Zealand and Europe use 50Hz lighting while the US uses 60Hz lighting.
Connecting the Camera to a PC
Device drivers and the software must be installed before you can connect the AO-
DIGICAM08 to your PC.
Please place the supplied CD in the optical drive on
your computer.
If the CD does not automatically start please locate
the drive in your computer window and launch the
Autrun.exe file found on the CD.
Click on the Install Drivers button and follow the
menus.
The computer will need to be restarted to complete the installation process.
Once restarted connect the Digicam to the Computer using the PC using the supplied USB
cable.
Click on the Install software button to install the included Photo and Video Software
• PhotoImpressions: picture editing software
• VideoImpressions: Video editing software.
Please refer to the software or the ArcSoft website for instruction of use.