I3projector l3302fhd - l3002uw user manual.
Table of contents ............................ 2 usage notice ................................... 3 safety information ................................. 3 precautions ............................................. 4 introduction ..................................... 6 package overview ..................
3 i3projector manual l3302fhd - l3002uw usage notice safety information the lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute...
4 www.I3-learning.Com precautions please follow all warnings, precautions and maintenance as recommended in this user s guide. ▀ ▀ warning- do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ▀ warning- to reduce the risk of fire or electric s...
5 i3projector manual l3302fhd - l3002uw usage notice do: turn off and unplug the power plug from the ac outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the dis- play housing. Disconnect the power plug from ac outlet if the product is not being used for a long pe...
6 www.I3-learning.Com due to different applica- tions in each country, some regions may have different accessories. Power cord package overview unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service c...
7 i3projector manual l3302fhd - l3002uw introduction product overview main unit 1. Control panel 2. Focus switch 3. Ventilation (inlet) 4. Ir receiver 5. Ventilation (outlet) 6. Speaker 7. Power socket 8. Input / output connections 9. Lens the interface is subject to model’s specifications. 6 7 8 4 ...
8 www.I3-learning.Com control panel 1. Power led 2. Enter 3. Temp led 4. Lamp led 5. Menu 6. Input 7. Four directional select keys 8. Power/standby button 9. Ir receiver 3 6 9 8 7 2 1 4 5.
9 i3projector manual l3302fhd - l3002uw introduction input/output connections monitor loop through only support in vga1- in/ypbpr. 1. Vga1-in/ypbpr connector (pc analog signal/component video input/hdtv/ypbpr) 2. Hdmi2 input connector 3. Hdmi1 input connector 4. Usb connector (connect to pc for remo...
10 www.I3-learning.Com remote control 1. Infrared transmitter 2. Led indicator 3. Power on/off 4. Ok 5. Four directional select keys 6. Menu 7. Exit 8. Zoom in 9. Reset 10. Auto 11. Source 12. Zoom out 13. Volume +/- 14. Keystone +/- 15. Image 16. Black screen 17. Aspect ratio 18. Vga1 19. Hdmi1 20....
11 i3projector manual l3302fhd - l3002uw introduction connecting the projector due to the difference in applications for each country, some regions may have different accessories. (*) optional accessory connect to computer/notebook e62405sp r molex 1 5 10 9 audio output microphone external display r...
12 www.I3-learning.Com e62405sp r 1 5 6 4 7 3 2 8 connect to video sources 1. ............................................. *15-pin to 3 rca component/hdtv adaptor 2. ................................................................................................... *hdmi cable 3. .....................
13 i3projector manual l3302fhd - l3002uw introduction powering the projector on / off turn on the pro- jector first and then select the signal sources. Powering on the projector 1. Securely connect the power cord and signal cable. When connected, the power/standby led will turn orange. 2. Turn on th...
14 www.I3-learning.Com contact the nearest service center if the projector displays these symptoms. Powering off the projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the “ ” button ...
15 i3projector manual l3302fhd - l3002uw introduction adjusting the projected image adjusting the projector s height the projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustab...
16 www.I3-learning.Com adjusting the projector s focus to focus the image, slide the focus switch to left/right until the image is clear. 1080p series: the projector will focus at distances from 1.443 to 1.887 feet (0.437 to 0.572 meters). Ultra wide series: the projector will focus at distances fro...
17 i3projector manual l3302fhd - l3002uw introduction adjusting projection image size (diagonal) 1080p series: projection image size from 80” to 100” (2.03 to 2.54 meters). Ultra wide series: projection image size from 120” to 140” (3.05 to 3.56 meters). Width height diagona l top view side view pro...
18 www.I3-learning.Com l3002uw diagonal length (inch) size of 16:6 screen screen size w x h projection distance (d) offset (hd) (mm) (inch) (mm) (inch) width height width height wide tele wide tele (mm) (inch) 120 2853.9 1070.2 112.4 42.1 468.8 na 18.5 na 365.6 14.4 125 2972.8 1114.8 117.0 43.9 498....
19 i3projector manual l3302fhd - l3002uw user controls control panel control panel & remote control using the control panel power refer to the “power on/off the projector” section on pages 13-14. Enter press “enter” to confirm your item selection. Input press “input” to select an input signal. Menu ...
20 www.I3-learning.Com remote control using the remote control infrared transmit- ter sends signals to the projector. Led led indicator. Power refer to the “power on/off the projector” section on pages 15-16. Exit press “exit” to close the osd menu. Zoom in zoom in the projector display. Reset retur...
21 i3projector manual l3302fhd - l3002uw user controls using the remote control menu press “menu” to launch the on-screen display (osd) menu. To exit osd, press “menu” again. Vga1 press “vga1” to choose vga in 1 connector. Black screen momentarily turns off/on the audio and video. Hdmi1 press “hdmi1...
22 www.I3-learning.Com on-screen display menus the projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the osd menu, press “menu” on the remote control or projector keypad. 2 when osd is displayed, us...
23 i3projector manual l3302fhd - l3002uw user controls picture color mode there are many factory presets optimized for various types of images. Use the ◄ or ◄ button to select the item. Bright: for brightness optimization. Pc: for meeting presentation. Movie: for playing video content. Game: for gam...
24 www.I3-learning.Com sharpness adjust the sharpness of the image. Press the ◄ button to decrease the sharpness. Press the ◄ button to increase the sharpness. Saturation adjust a video image from black and white to fully saturated color. Press the ◄ button to decrease the amount of saturation in th...
25 i3projector manual l3302fhd - l3002uw user controls screen aspect ratio auto: keep the image with original width-height ratio and maximize the image to fit native horizontal or vertical pixels. 4:3: the image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: the image will b...
26 www.I3-learning.Com v. Position press the ◄ button to move the image down. Press the ◄ button to move the image up. Digital zoom press the ◄ button to reduce the size of an image. Press the ◄ button to magnify an image on the projection screen. V keystone press the ◄ or ◄ button to adjust image d...
27 i3projector manual l3302fhd - l3002uw user controls setting language choose the multilingual osd menu. Press the ◄ or ◄ button into the sub menu and then use the ◄ or ◄ button to select your preferred language. Press ◄ on the remote control to finalize the selection. Menu location choose the menu...
28 www.I3-learning.Com lan (standby) choose “on” to enable lan connection. Choose “off” to disable lan connection. Vga b (function) input: choose “input” to let the vga port works as a vga input function. Output: choose “output” to enable the vga out function once the projector is powered on. Test p...
29 i3projector manual l3302fhd - l3002uw user controls volume speaker choose “on” to enable the speaker. Choose “off” to disable the speaker. Line out choose “on” to enable the line out function. Choose “off” to disable the line out function. Microphone choose “on” to enable the microphone. Choose “...
30 www.I3-learning.Com options logo use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Default: the default startup screen. User: use stored picture from “logo capture” function. Logo capture press ◄ button to cap...
31 i3projector manual l3302fhd - l3002uw user controls auto power off (min) sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Laser settings ...
33 i3projector manual l3302fhd - l3002uw user controls 3d 3d auto: when a hdmi 1.4a 3d timing identification signal is detected, the 3d image is selected automatically. Choose “on” to enable 3d function. Choose “off” to disable 3d function. 3d invert if you see a discrete or overlapping image while ...
34 www.I3-learning.Com lan status display the network connection status. Dhcp configure the dhcp settings. On: choose “on” to let the projector to obtain an ip address automatically from your network. Off: choose “off” to assign ip, subnet mask, gateway, and dns configuration manually. Ip address di...
35 i3projector manual l3302fhd - l3002uw user controls group name display the group name. Projector name display the projector name. Location display the projector location. Contact display the contact information..
36 www.I3-learning.Com how to use web browser to control your projector 1. Turn on dhcp to allow a dhcp server to automatically assign an ip, or manually enter the required network information. 2. Then choose apply and press button to complete the configuration process. 3. Open your web browser and ...
37 i3projector manual l3302fhd - l3002uw user controls click start, click control panel, click network and internet connections, and then click network connections. Click the connection you want to configure, and then, under network tasks , click change settings of this connection. Step 4: on the ge...
38 www.I3-learning.Com 3) default gateway:192.168.0.254 step 6: to open internet options, click ie web browser, click internet options, click the connections tab and click “lan settings...”. Step 7: the local area network (lan) setting dialog box appears. In the proxy server area, cancel the use a p...
39 i3projector manual l3302fhd - l3002uw user controls 250+ control systems on a single ethernet network (more are possible, the number depends on the combination of ip id and ip address). Crestron roomview monitors each projector, including projector’s online status, system power, lamp life, networ...
Accessing multimedia files this projector supports two methods to project the media files (photos, videos, music, documents) stored on following devices: a. Via wireless dongle (optional) - wirelessly access the media files stored on your mobile phone, tablet pc, notebook, or desktop. B. Via usb fla...
Mobile display to access the media files stored on your mobile device or tablet pc, do the folllowing: 1. On multimedia menu, select mobile/tablet. 2. On your mobile device or tablet pc, download “ezview” application app store (ios) or play store (android). 3. Enable your mobile device or tablet pc ...
Projector. Laptop display to access the media files stored on your laptop/notebook, do the folllowing: 1. On multimedia menu, select laptop. 2. Enable your laptop/notebook wifi function, and search the ap name listed in the wi-fi network list. 3. On the initial connection, you will be prompted to en...
5. Launch “ezview” application and enter the control code shown on the right-bottom side of the screen. 6. Wait until the connection is established. The media files on your laptop/notebook can be accessed using the projector. Desktop display to access the media files stored on your desktop, do the f...
3. Launch “ezview” application and enter the control code shown on the right-bottom side of the screen. 4. Wait until the connection is established. The media files on your desktop can be accessed using the projector. Usb storage display to access the media files stored on your usb flash drive, do t...
3. Use the keys to select the file to view/play and press the “enter” key to confirm. Configuring multimedia settings to change the settings, do the folllowing: 1. On multimedia menu, select settings..
2. Use the keys to select the desired menu option and press the “enter” key to enter the submenu. System: select this option to view the firmware version and update firmware. Video: select this option to change the display ratio and set the repeat mode. Photo: select this option to change the displa...
47 i3projector manual l3302fhd - l3002uw appendices installing and cleaning the optional dust filter we recommend you clean the dust filter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the follow...
48 www.I3-learning.Com compatibility modes vga analog a. Pc signal modes resolution v. Frequency [hz] h. Frequency [hz] vga 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 ibm 720x400 70 31.5 svga 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600...
49 i3projector manual l3302fhd - l3002uw appendices uxga 1600x1200 60 75.0 b. Extended wide timing modes resolution v. Frequency [hz] h. Frequency [hz] wxga 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 wsxga+ 1680x1050 60 65.3 c. Component signal modes resolution v. Frequency ...
50 www.I3-learning.Com hdmi digital a. Pc signal modes resolution v. Frequency [hz] h. Frequency [hz] vga 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 ibm 720x400 70 31.5 svga 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 apple, ma...
51 i3projector manual l3302fhd - l3002uw appendices sxga+ 1400x1050 60 65.3 uxga 1600x1200 60 75.0 b. Extended wide timing modes resolution v. Frequency [hz] h. Frequency [hz] wxga 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 wsxga+ 1680x1050 60 65.3 c. Video signal modes reso...
52 www.I3-learning.Com rs232 port setting items method communication method asynchronous communication bits per seconds 19200 data bits 8 bits parity none stop bits 1 flow control none rs232 signals connection rs232 commands and protocol function list rs232 shell is grounded. Computer com port (d-su...
53 i3projector manual l3302fhd - l3002uw appendices [ack] [cr] is the effective return for commands received. Commands set list case sensitive, each command end by [cr](carriage returns) command item remark f00 power on f01 power off (quick power off) f02 power off f05 vga1 f06 vga2 f36 hdmi1 f03 hd...
54 www.I3-learning.Com vga1 command “f05”[cr] (hex:ox46 0x30 0x35 0x0d) details change the input to “computer1”. Return ok [ack] [cr] ng “?”[cr] vga2 command “f06” [cr] (hex:ox46 0x30 0x36 0x0d) details change the input to “computer2”. Return ok [ack] [cr] ng “?”[cr] video command “f33”[cr] (hex:ox4...
55 i3projector manual l3302fhd - l3002uw appendices multimedia command “a15”[cr] (hex:ox40 0x31 0x35 0x0d) details change the input to “multimedia”. Return ok [ack] [cr] ng “?”[cr] [ack] [cr] is the effective return for commands received..
56 www.I3-learning.Com regulation & safety notices this appendix lists the general notices of your projector. Fcc notice this device has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable ...
57 i3projector manual l3302fhd - l3002uw appendices disposal instructions do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions this device complies with part 15 of the...
58 www.I3-learning.Com appendices - this projector is a class 1 laser device that conforms with iec 60825-1:2014, cfr 1040.10 and 1040.11, iec 62471 low risk group 1 - this projector has built-in class 4 laser module. Disassembly or modification is very dangerous and should never be attempted. - any...
59 i3projector manual l3302fhd - l3002uw appendices please note that damage resulting from incorrect in- stallation will void the warranty. Ceiling mount installation 1. To prevent damage to your projector, please use the ceiling mount. 2. If you wish to use a third party ceiling mount kit, please e...
Www.I3-technologies.Com info@i3-technologies.Com authorised distributor.