1. DL manuals
  2. LaserShield
  3. Security System
  4. Instant Security System
  5. Quick Start Manual

LaserShield Instant Security System Quick Start Manual

Other manuals for Instant Security System: Owner's Manual, Quick Start Manual

Summary of Instant Security System

  • Page 1

    Included in this package: 120105 l a s e r s h i e l d ® i n s t a n t s e c u r i t y s y s t e m quick start guide pqs-sk-01.080318 lasershield master alarm unit (mau) lasershield wireless detection unit (wdu) 2 keychain remotes 8ʼ foot telephone cord 2 ac power adapters monitoring service agreeme...

  • Page 2: Www.Lasershield.Net

    Www.Lasershield.Net plug & power • plug one of the ac power adapters into a wall outlet and insert the connector into the power port on the rear of the mau • connect one end of the phone cord to a live telephone jack. Connect the other end to the phone jack labeled to wall on the rear of the mau. (d...

  • Page 3: Test System

    Test system exit learn mode learn & link devices 4 5 6 • press learn button on rear of mau • mau will announce an inventory of the devices successfully learned into the system (if fewer than one keychain remote and one wdu are learned into to the system the mau will announce "system disabled". Retur...

  • Page 4: Contact Information

    Contact information arming at night arming and disarming 7 8 note: when returning, a warning tone will beep for 20 seconds to remind you to disarm. Note: remember to press bypass button to re-enable unit before leaving your premises. Mau will always announce any bypassed unit during arming. Wdu pani...