Lathem PC700 User Manual - page 10
6
• Welcome
Step 3: Network Connection – Wi-Fi or Wired
Wi-Fi Connection: With the power adapter connected and the clock
mounted to the wall follow these steps to configure the Wi-Fi
connection. Note: The Wi-Fi option is enabled by default.
• From the PC700 touchpad press the Admin button. Enter the
administrator password and press Enter.
• The Administrator Main Menu screen will display.
• Press Network Setup. The Network Setup screen will
display.
• Press WiFi. The PC700 will check to see if there are any Wi-
Fi connections within range and display them in a list. Note:
Make sure the WiFi Enabled is set to Yes.
• Select the desired Wi-Fi connection from the list.
• The Enter Passcode screen will display with a keypad.
• Using the master buttons to select upper case letters, lower
case letters, numbers or symbols enter the passcode for the
wireless network. Note: You may need to contact your
network administrator for the wireless passcode information.
Use this button for upper case letters.
Use this button for lower case letters.
Use this button for numbers.
Use this button for symbols.
• Press OK. A confirmation message will display when the
PC700 is connected, press OK.
• When finished press the back button until you have
returned to the home screen.
Master
Buttons