Lattice Semiconductor LCMXO256C-S-EV User Manual - page 2
2
MachXO Starter Evaluation Board
Lattice Semiconductor
User’s Guide
Introduction
The Lattice MachXO Starter Evaluation Board provides a convenient platform to evaluate, test and debug user
designs. The board features a Lattice MachXO256 cross-over programmable logic device in a 100-pin TQFP pack-
age, power input jacks, a 33MHz clock oscillator and I/O connections. The Lattice MachXO I/Os are connected to a
rich variety of interfaces, including switches (momentary and ON/OFF), LEDs, 0.10” headers and PCB test points.
Features
• Lattice MachXO device
• Prototyping area
• Access to 81 user I/Os
• Independent voltage control for core and I/O
• 33MHz on-board oscillator
• Status LEDs
• Input switches
• Pads for optional board expansion.
• AC adapter
• Lattice ispDOWNLOAD
®
cable, to download programming files to the MachXO device.
Software Support
• Lattice ispLEVER
®
design tools (release 5.0 SP1 or later) for HDL design targeting the MachXO device. The
MachXO device is supported in the ispLEVER-Starter software, available from www.latticesemi.com/starter.
• ispVM
®
System, for device programming. Available for download from www.latticesemi.com/software.
Electrical, Mechanical and Environmental Specifications
The nominal board dimensions are 2.875 inches by 3.375 inches. The environmental specifications are as follows:
• Operating temperature: 0ºC to 55ºC
• Storage temperature: -40ºC to 75ºC
• Humidity: < 95% without condensation
• VDC input (+/- 10%) up to 4A
Figure 1 shows the board outline.