Summary of X-631+
Page 2
Launch x-631/x-631+ installation and parts manual ⅰ table of contents precautions for operation..........................................................................................................................................................1 unpacking...........................................
Page 3: Precautions For Operation
Launch x-631/x-631+ installation and parts manual precautions for operation 1 precautions for operation z please read the user’s manual and the installation and parts manual carefully before operating x-631or x-631+. Z only the qualified technician can operate the wheel aligner. Z the operator must ...
Page 4: Unpacking
Launch x-631/x-631+ installation and parts manual unpacking 2 unpacking x-631/x-631+ is delivered to the customers in two cartons: a cabinet box and an accessory box. Remove cabinet box the cabinet box is 690mm×726mm×1295mm in size. There is a pc set (including host computer and monitor), keyboard, ...
Page 5: Installation and Adjustment
Launch x-631/x-631+ installation and parts manual installation and adjustment 3 installation and adjustment install the main unit z place the cabinet to a suitable place and leave enough space for installation. Open the drawer and you can see the user’s manual, parts manual, packing list, etc. Pleas...
Page 6: Structure
Launch x-631/x-631+ installation and parts manual structure 4 structure overall structure the x-631/x-631+ wheel aligner mainly consists of main unit, probe rods, wheel clamps, turntables, steering wheel holder and brake pedal depressor, etc. As shown in the fig.3.1. Fig.3.1 1— main unit, 2—rl probe...
Page 7
Launch x-631/x-631+ installation and parts manual structure 5 main unit the main unit consists of cabinet, computer, interface circuit, power source, etc. As shown in the fig.3.2. The computer assembly includes computer main unit, display, keyboard, mouse, and printer. The display is on the top of t...
Page 8
Launch x-631/x-631+ installation and parts manual structure 6 turn the adjusting knob to adjust the span between wheel claws, and then attach the clamp to the wheel rim. Adjust the knob to make the wheel clamp fixed on wheel rim tightly. Use the wheel clamp tie to bind the wheel clamp and the wheel ...
Page 9
Launch x-631/x-631+ installation and parts manual structure 7 when using the electronic turn table, connect its connecting cable to 3pin socket in the middle of the front left or front right probe rod. Steering wheel holder x-631/x-631+ has a steering wheel holder as shown in fig.3.7. Use the steeri...
Page 10: Part List
Launch x-631/x-631+ installation and parts manual part list 8 part list part list for x-631 item erp no. Part name qty 1 103202123 cabinet of x-631 wheel aligner 1 2 108020013 monitor 1 3 108030042 computer 1 4 108010003 color ink jet printer 1 5 x108020008 keyboard 1 6 x108020009 mouse 1 7 10805002...
Page 11
Launch x-631/x-631+ installation and parts manual part list 9 part list for x-631+ item erp no. Part name qty 1 103202237 cabinet of kwa-300 wheel aligner 1 2 108020002 monitor 1 3 108030107 computer (dell, 380, with windows7 multi-language operating system) 1 4 108010025 color ink jet printer 1 5 x...