- DL manuals
- Laundrylux
- Dryer
- DAWF0 SERIES
- Installation Manual
Laundrylux DAWF0 SERIES Installation Manual
Summary of DAWF0 SERIES
Page 1
Crossover in a class by itself laundrylux 461 doughty boulevard inwood, ny 11096-0338 www.Laundrylux.Com service: (516) 371-0700 parts: (516) 271-2000 dawf0 and daws0 series dryers ! D r y e r i n s t a l l a t i o n m a n u a l ".
Page 2
2 112819-1 we have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. The illust...
Page 3
112819-1 3 important you must disconnect and lockout the electric supply and the gas supply or the steam supply before any covers or guards are removed from the machine to allow access for cleaning, adjusting, installation, or testing of any equipment per osha standards. Please observe all safety pr...
Page 4
4 112819-1 safety precautions ___________________ ! Warning for your safety, the information in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury, or loss of life. The dryer must never be operated with any of the back guards, outer...
Page 5
112819-1 5 notes _____________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ______________________________________________...
Page 6
6 112819-1 specifications _____________________________________________________________________ note: the manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Maximum capacity (dry weight) 22 lb 9.98 kg tumbler diameter 25-3/4” 65.41 cm tumbler ...
Page 7
112819-1 7 specifications _____________________________________________________________________ note: the manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Top control.
Page 8
8 112819-1 specifications _____________________________________________________________________ bottom control (stackable).
Page 9
112819-1 9 installation procedures ______________ installation should be performed by competent professional in accordance with local, state, and country codes. In the absence of these codes, the installation must conform to applicable american national standards: ansi z223.1- latest edition (nation...
Page 10
10 112819-1 domestic type i example: two unrestricted openings measuring 6-inches by 10-inches (15.24 cm by 25.4 cm) are acceptable. If a closet door is installed: unobstructed air openings are required. The air openings shall be located 3-inches (7.62 cm) from the lower opening (above floor level) ...
Page 11
112819-1 11 example: for a bank of four dryers, two unrestricted openings measuring 10-inches by 6-inches (25.4 cm by 15.24 cm) are acceptable. Important: make-up air must be free of dry cleaning solvent fumes. Make-up air that is contaminated by dry cleaning solvent fumes will result in irreparable...
Page 12
12 112819-1 note 1 opening from combustible materials must be 2-inches (5.08 cm) larger than the duct (all the way around). The duct must be centered within this opening. Note 2 distance should be 2 times the diameter of the duct to the nearest obstruction. Multiple dryer venting with 4-inch (10.16 ...
Page 13
112819-1 13 electrical information ________________ electrical requirements all electrical connections must be made by a properly licensed and competent electrician. This is to ensure that the electrical installation is adequate and conforms to local, state, and national regulations or codes of the ...
Page 14
14 112819-1 gas information ______________________ it is your responsibility to have all plumbing connections, materials, and workmanship conform to local and state regulations or codes of the country of destination. In the absence of such codes, all plumbing connections, materials, and workmanship ...
Page 15
112819-1 15 piping / connections inlet connection is 3/8” n.P.T. There should be a minimum 6-inch (15.24 cm) clearance between the back guard and the first bend in the gas piping for ease of servicing. It is recommended that a gas shutoff valve be provided to the gas supply line of each dryer for ea...
Page 16
16 112819-1 parts required for conversion: description p/n qty unregulated gas conversion kit** 140414 1 or regulated l.P. Gas conversion kit*** 140416 1 burner orifice (injector) * 1 l.P. Conversion label 114515 1 * refer to page 15 for orifice (injector) size. ** required for unregulated propane o...
Page 17
112819-1 17 reinstall the burner tube onto the burner base. Select from the following three options, the conversion to be performed: • converting from unregulated l.P. To regulated natural gas: use a flat screwdriver to remove the cap with blocking pin and install the regulator vent cap from the kit...
Page 18
18 112819-1 preoperational test __________________ all dryers are thoroughly tested and inspected before leaving the factory. However, a preoperational test should be performed before the dryer is publicly used. It is possible that adjustments have changed in transit or due to marginal location (ins...
Page 19
112819-1 19 service / parts information ___________ service service must be performed by a qualified trained technician. If service is required, contact the reseller from whom the equipment was purchased. If the reseller cannot be contacted or is unknown, contact the service department for a reselle...
Page 20
20 112819-1 data label information _______________ standard label when contacting laundrylux, the information on the data label is required to ensure proper service/parts assistance. The data label is located on the back of the machine. 1. Model number – this describes the style of dryer and type of...
Page 21
112819-1 21 notes __________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________ _____________________________...
Page 22
Part no. 112819.