Laundrylux EHWF09810M Installation Manual - Preventive Maintenance
7:1
Preventive maintenance
To keep your machine in proper working order, follow the preventive maintenance
recommendations provided below.
The maintenance interval should be adjusted according to machine usage.
Daily
•
Check the door and door lock:
- Open the door and try starting the machine. The machine MUST NOT START.
- Close the door, start the machine and try opening the door
using reasonable force.
It MUST NOT BE
POSSIBLE TO OPEN THE DOOR WHILE THE MACHINE IS
OPERATING!
- Check that the door does not leak.
- Clean the door seal, removing any detergent and lint.
•
Check that there are no indications of leaks behind or around the machine.
•
Clean out any residue remaining in the detergent dispenser.
•
Inspect liquid chemical tubing and connections for leaks. Repair as necessary.
Every third month (refer this service to qualified personnel)
May only be carried out by authorized personnel.
•
Check that the door does not leak.
•
Check the drain pump strainer and remove any accumulated lint and debris.
•
Inspect the interior of the machine (during an actual wash cycle to ensure that no
leaks are noticed) by:
- Turning of the main power switch of the machine.
- Remove the top panel.
- Start a wash program.
- KEEP CLEAR OF MOVING PARTS WHILE MACHINE IS OPERATING!!
- Inspect all internal hoses, seals and gaskets for signs of leakage.
Repair as necessary.
- Check that water inlet screens are clean of debris. Dirty screens
result in longer fill times, reducing productivity.
- Inspect the drive belt. Adjust the tension or replace as necessary.
- Check that there are no signs of leakage on the floor beneath the
machine. Locate and repair any leak.
Contact your local dealer, or Laundrylux Technical Support at 516-371-0700 if you
have questions regarding installation, operation, or maintenance of your machine.