Lava iris X1 Atom User Manual - User Guide
User Guide
Model – iris X1 Atom
24
10.3. Connect to Wi-Fi Networks
Refer to Section 6 for details.
10.4. Pair With Bluetooth Devices
Go to Settings > Wireless & networks>
Bluetooth settings.
If Bluetooth is off, check Bluetooth to turn it on.
Your phone scans and displays the Bluetooth
devices in range.
If the device you want to pair with is not in the
list, make it discoverable.
If your phone stops scanning before you make
the other device discoverable, touch Scan for
devices.
Touch the ID of the other device in the list
Settings to pair them. If you are prompted to
for a password, enter any password on one
device and enter the same password you
entered in the other device to be paired, If
the pairing is successful, your phone
connects to the device.
10.5. Connect to Internet via your Phone
You can browse the Internet on your PC using your
mobile phone. To do this:
Connect your mobile phone to your PC via the
USB cable.
Go to Settings> Wireless & Networks>More
>Tethering & portable hotspot and then
touch USB Tethering.
A prompt for installation will appear on your PC.
Proceed as suggested.
In case of Linux, Windows 7 and Vista OS, the drivers
get automatically installed. However, in case of
Windows XP, maybe you need to manually install the
drivers.
10.6. Install Secure Certificate from SD Card
If your VPN or Wi‐Fi Network relies on secure
certificates, you must obtain the certificates and store
them in your phone’s storage, before you can configure
access to those VPN or Wi‐Fi networks on your phone.
You may need to download the certificates from a
website.