Lava Vision LT-23FEP Owner's Manual - Other Functions
17
Other functions
TV, SCART1, SCART2 and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV
button)
External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCARTmode is used
for SCART type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PR
xy button to select Input.
4. Press the VOL
Ïq button to select TV, SCART1,
SCART2 and S-VIDEO.
SCART1 : AV device connected to the SCART2 jack.
SCART2 : AV device connected to the TV's SCART1 jack.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
To return to TV mode, press the TV/AV button.
Alternatively you can select the TV, SCART1, SCART2, S-
VIDEO, PC-ANALOG or PC-DIGITAL mode by pressing
the TV/AV button.
Auto sleep
If you select Auto sleep on the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button, select the Special menu.
2. Press the PR
xy button to select Auto sleep.
3. Press the VOL
Ïq button to select On.
4. Press the TV/AV button to return to normal TV
viewing.
Blue back
Programme without a program signal appear in blue.
Auto wide (Aspect Ratio Control)
Press the ARC button to select a desired picture format.
Each press of the ARC button, selects Auto Wide, 16:9,
14:9, ZOOM, 1:1 and Auto wide mode.
POWER
MENU
TV/AV
PR
OK
PR
VOL
VOL
TV/PC
SLEEP
TEXT/MIX
UPDATE TIME REVEAL HOLD
Q.VIEW
LIST
PSM
SSM
I/II
1
2
3
4
5
6
7
8
9
*
*
0
POSITION SWAP MODE
PR
PIP
ARC
INPUT
ƇƉ ȖȘ 5-6=<>)>
Special
Input
TV
Auto sleep Off
Blue back
On
Auto wide Off