Lava Vision LT-23FEP Owner's Manual - Connecting Pc As Monitor
25
Connecting PC as monitor
PC/DTV INPUT
1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC
to the PC/DTV input socket of the set.
2. Connect the PC AUDIO IN
cable from the PC to the
PC AUDIO IN of the set.
3. Press the TV/AV or TV/PC
button to select PC ANALOG
IN mode.
4. Switch on the PC, and the
PC screen appears on the set.
The set can be operated as the PC monitor.
DVI (Digital Visual Interface) INPUT
1. Connect the DVI of PC to the DVI input on the TV.
2. Select PC-DIGITAL mode by pressing the TV/AV button repeatedly. (When
DVI source is connected, TV/AV mode converts PC to DVI mode.)
Resolution
Note:
a. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best
image quality for your LCD monitor. If used under the other resolutions, some
scaled or processed pictures may appear on the screen. The set has been pre-
adjusted to the mode VESA 1,024x 768 @60Hz.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
SCART1
SCART2
ANT.
PC ANALOG IN
PC DIGITAL IN
PC AUDIO IN
640X480
640X480
640X480
640X480
720X400
800X600
800X600
800X600
800X600
1024X768
1024X768
1024X768
1280X768
47.7 KHz
60 Hz
VGA
SVGA
XGA
WXGA
31.5 KHz
35 KHz
37.9 KHz
37.5 KHz
31.5 KHz
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
48.4KHz
56.5 KHz
60.2 KHz
60 Hz
67 Hz
72 Hz
75 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60Hz
70 Hz
75 Hz
Mode
Resolution
Horizontal
frequency (KHz)
Vertical
frequency (Hz)