LAVAZZA LB2210 Instructions For Installation And Use Manual - page 15
• 15 •
ENGLISH
10.4 Description of programming menu
10.4 Description of programming menu
10.5 Description of service menu
10.5 Description of service menu
Menu
Menu
Notes
Notes
Password
Required only if other than 0.
1. Identifi cation
1.1. Machine code
Machine identifi cation code.
1.2. Model
Read only.
1.3. Version
Read only.
1.4. Asset Number
Service provider identifi cation code.
2. Setup
2.1. Temperatures
2.1.1. Std. temperature
Default: 100°C
Operating temperature when machine is
“warmed up”.
2.2. Programme doses
2.2.1. Dose water short
Default: 165
2.2.2. Dose water long
Default: 275
Qty. small drink (it is a numerical parameter
without any physical equivalent, e.g. cc).
Qty. large drink (it is a numerical parameter
without any physical equivalent e.g. cc).
2.3. Prebrewing
Default: Medium
Prebrewing time.
2.4. Ventilate
Default: No
Enables/disables rinse cycle when machine is
switched on (this function will only be performed
when the machine is cold).
2.5. Descale
2.5.1. Water hardness
Default: 1
2.5.2. Descal. warning
Default: Yes
Range: 0-4 - Water hardness setting to
determine the quantity of water after which the
machine will signal a descaling alarm.
0 = disables the descale control function.
Enables/Disables display of descaling alarm.
2.6. Filter warning
Default: No
Enables/Disables display of an alarm message
indicating that the fi lter needs replacing.
2.7. Credits
2.7.1. Credit control
Default: No
2.7.2. Credits warning
Default: No
Enable/Disable the dispensing control via credit
management.
Enable/Disable the display of alarms “Credit
low” and “No credit”
2.8. Payment method
2.8.1. Enable system
Default: No
2.8.2. Display credit
Default: No
Enables/Disables brewing/dispensing by
means of an external coin mechanism.
Enables/Disables display of the amount inser-
ted in the coin box.
2.9 Grounds control
Default: Yes
It enables/disables the machine to brew without
checking the number of used pods in the dump
box.
3. Save energy
3.1. Stand-by enabled
Default: No
Enables/disables stand-by function.
3.2. Ritardo stand-by
Default: 10
Elapsed time in minutes since last use before ma-
chine switches off when in the Stand-by time band.
3.3. Monday
3.3.1. Switch on time
Default: 08.00
3.3.2. Switch off time
Default: 20.00
It enables you to program the machine ON/OFF
times for Monday.
3.4. Tuesday
3.4.1. Switch on time
3.4.2. Switch off time
It enables you to program the machine ON/OFF
times for Tuesday.
3.5. Wednesday
3.5.1. Switch on time
3.5.2. Switch off time
It enables you to program the machine ON/OFF
times for Wednesday.
3.6. Thursday
3.6.1. Switch on time
3.6.2. Switch off time
It enables you to program the machine ON/OFF
times for Thursday.
3.7. Friday
3.7.1. Switch on time
3.7.2. Switch off time
It enables you to program the machine ON/OFF
times for Friday.
3.8. Saturday
3.8.1. Switch on time
3.8.2. Switch off time
It enables you to program the machine ON/OFF
times for Saturday.
3.9. Sunday
3.9.1. Switch on time
3.9.2. Switch off time
It enables you to program the machine ON/OFF
times for Sunday.
4. Security
4.1. Password
Default: 000000
sets the password for accessing the
programming menu (6 digits)
4.2. Service password
Default: 0000
sets the password for accessing the service
menu (4 digits)
5. Reset to default
selecting “Yes” will restore all default settings
6. Exit
Press ENTER to quit.
Menu
Menu
Notes
Notes
Password
Required only if other than 0
1. Date & Time
1.1. Time
Sets the current time
1.2. Date
1.2.1. Day
1.2.2. Month
1.2.3. Year
1.2.4. Day of the week
2. Audit
2.1. Total from reset
2.1.1. Total from reset
2.1.2. P1 from reset
2.1.3. P2 from reset
2.1.4. P3 from reset
2.1.5. Last Reset
2.1.6 Reset Audit
Number of total products since last reset
Number of type 1 products (espresso) since
last reset
Number of type 2 products (long coffee) since
last reset
Number of type 3 products (free cycle) since
last reset
Read only - Date and time of last reset
Selecting “Yes” will clear all partial counters
2.2. Total from init
2.2.1. Total from init
2.2.2. P1 from init
2.2.3. P2 from init
2.2.4. Pr3 from init
2.2.5. Last init
Number of product totals since the beginning
of the machine’s life
Number of type 1 products (espresso) since
the beginning of the machine’s life
Number of type 2 products (long coffee) since
the beginning of the machine’s life
Number of type 3 products (free cycle) since
the beginning of the machine’s life
Read only - Date and time of last initialization
3. Brew unit wash
Washing of the brew group is performed
4. Descale
4.1. Qty till descale
4.2. Final descale
4.3. Do it now
Remaining quantity of water to be dispensed
before having to perform next decalcifi ca-
tion (expressed in litres).
Date and time of last descaling.
Pressing “Enter” will launch a descaling cycle.
5. Enable fi lter
The new fi lter installed in the machine
undergoes a rinse cycle.
6. Errors
6.1. Error log
6.1.1. Display of errors
with up/down keys
6.2. Reset log
6.3. Errors reset
The last N errors can be displayed: index 0
= error of oldest date. May be accessed
only if there is at least one error.
Selecting “Yes” will delete the list of the last
errors.
Selecting “Yes” will cancel any Out-of-Service
conditions that do not automatically reset.
7. Credits
7.1. Add credits
0
7.2. Zero credits
Default: No
7.3. Alarm level
0
The value indicates the number of credits that
are to be added to those already in the
machine.
Select “Yes” to zero all credits in the machine.
The value indicates the quantity of residual
credits below which the message “Credit
low” is displayed
Note: the message is only displayed if
enabled.
8. Exit
Press ENTER to quit.