LaView LV-N9808C8E User Manual - •
www.LaViewUSA.com
36
Add User Menu
3.
Enter the information for a new user:
User Name, Password, Level and User’s
MAC Address.
Level: Set the user level to Operator or
Guest. Different user levels have different
operating permission.
•
Operator: The Operator user level
has permission for Two-way Audio
in Remote Configuration and all
operating permission in Camera
Configuration.
•
Guest: The Guest user does not
have permission for Two-way Audio
in Remote Configuration and has
local/remote playback in Camera
Configuration.
•
User’s MAC Address: The MAC
address of the remote PC which logs
onto the NVR. If it is configured and
enabled, it only allows the remote
user with this MAC address to access
the NVR.
4.
Click the OK button to save settings
and go back to the User Management
interface. The added new user will be
displayed on the list.
Added User Listed in User Management Interface
5.
Select the user from the list and then click
the
button to enter the Permission
Settings interface, as shown in Figure
13. 14.
User Permission Settings Interface
6.
Set the operating permissions (Local
Configuration, Remote Configuration and
Camera Configuration) for the user.
Local Configuration
•
Local Log Search: Searching/viewing
logs and system information of NVR.
•
Local Parameters Settings:
Configuring parameters, restoring
factory default parameters and
importing/exporting configuration
files.
•
Local Camera Management: The
adding, deleting and editing of IP
cameras.
•
Local Advanced Operation: Operating
HDD management (initializing HDD,
setting HDD property), upgrading
system firmware, clearing I/O alarm
output.
•
Local Shutdown Reboot: Shutting
down or rebooting the NVR.
Remote Configuration
•
Remote Log Search: Remotely
viewing logs that are saved on the
NVR.
•
Remote Parameters Settings:
Remotely configuring parameters,
restoring factory default parameters
and importing/exporting configuration
files.
•
Remote Camera Management:
Remote adding, deleting and editing
of the IP cameras.
•
Remote Serial Port Control:
Configuring settings for RS-232 and
RS-485 ports.
•
Remote Video Output Control:
Remotely Sending button control
signals.
•
Two-Way Audio: Realizing two-way
audio between the remote client and
the NVR.