Lawmate PV-500 LITE Quick Manual - ■ Connecting Analog Camera
■ Connecting Analog Camera
To connect analog camera, plug-in analog camera jack into CAM IN port on the device.
1.
Push REC/STOP switch to REC position to start recording
2.
Various recording mode is optional in SETTING menu.
3.
NOTE: Main device or controller automatically accesses recording status after main device
or controller is turned on without lag time.
■ Installing and Replacing Battery
NOTE: PV-500LITE has a removable battery. You can purchase extra battery from your
dealer. Follows step-by-step instruction indicated below to replace battery.
1. Battery is already placed on top of the metallic contact strip on the
device. Gently slide switch to OPEN position and push battery in red arrow
pointed direction .
Note that OPEN switch is aligned on the same side with SD Card Slot..
2. Gently push in red arrow pointed direction to secure battery and ensure
it is locked in the proper position.
3. Push OPEN switch in red arrow pointed direction to lock battery onto
device. Now, battery is properly installed.
4. To replace another battery, gently slide OPEN switch in red arrow
pointed direction to unlock battery.
5.Push battery in red arrow pointed direction.
NOTE: Follow directions indicated above to install and replace battery. Forcing device to
release would only physically damage device.
■ Connecting Wired Controller