LCG 1207 User Manual - page 12
DICE6 (LCG-1207)-User Manual
Press MENU,go back to the initial setting
Press UP/DOWN,display ”CHnd”
Press ENTER to change the content, the display will glinting at this moment
Press UP/DOWN to select the DMX channels that you need,
3CH,6CH,8CH,10CH,11CH and so on
Press ENTER and keep on 10 seconds,will appear”A001”. DMX mode will be
stored automatically and the screen will stop glinting.
Exp:turn off the display, the operation is as below:
Press MENU,go back to the initial setting
Press UP/DOWN,display “LED”
Press ENTER to change the content, the display will flash at this moment
Press UP/DOWN to select “OFF”
Press ENTER to confirm, then select the working mode that you need. When stop
pressing, the display will turn off after a while. When the display is off, press any
button to activate the display. If setting the led to “off”, when stop pressing, the
display will turn off after a while.
2.Details of program built inside(Pr- -)
Press MENU, go back to the initial setting
Press UP / DOWN until Pr--
Press ENTER to choose, the display will flash at this moment
Press UP / DOWN to change the address code to select pr00
Press ENTER to select and store the current menu options. DMX mode will be
stored automatically and the screen will stop flashing.
Remark: Pr63--- Pr66 Can change the content Of SP, the speed of jumping can be
changed , SP00 is the fastest,SP15 is the slowest
Pr00-Pr62:R,G,B.A,W,UV single color or multi-colors lighting
12