1. DL manuals
  2. LCN
  3. Door Opening System
  4. 4000T
  5. Product Manual

LCN 4000T Product Manual

Manual is about: 4000 Series

Summary of 4000T

  • Page 1

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 product comparison this chart shows a basic comparison of 4000 series closers. Refer to the specific closer chapter for complete details. 4000 series * indicates high security closer. Refer to that section of the catalog. “p...

  • Page 2

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 applications for aluminum, hollow metal, or wood swinging doors and frames. Can be used with hinge or pivot mounted door. Adapter plates and other installati...

  • Page 3

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4010 series closer is shipped with regular arm, standard plastic c o v e r, and self reaming and tapping screws. See 4010 series pages 5 & 6 for opt...

  • Page 4

    Hinge (pull) side mounting maximum opening can be templated for 100°, a = 5 15/16” (151 mm) b = 11 15/16” (303 mm) or 140°. A = 4 3/16” (106 mm) b = 10 3/16” (259 mm) hold-open points up to maximum opening with hold-open arm. Arm clearance above door. Regular arm requires c = 1 1/16” (27 mm). Hold-o...

  • Page 5

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4010 series cylinders cylinder, 4010-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4010 series page...

  • Page 6

    Lcn 4010 series installation accessories plate, 4010-18 required where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) top rail. 18 6 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10

  • Page 7

    Indicates recommended range of door width for closer size. How-to-order 4010 series closers 1. Select cylinder size 4011 (adjustable from size 1 to 5) 4016 (del not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black...

  • Page 8: Notes

    8 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 9

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4010t series closer is shipped with standard arm, standard track, track roller, standard plastic cover, and self reaming and tapping screws. See 401...

  • Page 10

    Hinge (pull) side mounting maximum opening templating allows 180° with standard arm, limited to 120° when optional bumper is installed. Consult factory if door will be held open at 180° hold-open points at , 90°, 95°, 100°, 105°, 110° or 120°, depending on the clip location in track. Please note tha...

  • Page 11

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4010t series cylinders cylinder, 4010t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4010t series p...

  • Page 12

    Lcn 4010t series 3034 installation accessories plate, 4010t-18 required where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) top rail. Track bumper, 4010t-169 mounts in track to assist backcheck, does not replace auxiliary stop. Limits maximum opening. Consists of bumper, bu...

  • Page 13

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. Reduced opening force 4010t closers caution ! Any manual door closer, including those certified by...

  • Page 14: Notes

    14 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 15

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4020 series closer is shipped with regular arm, standard plastic cover, and self reaming and tapping screws. See 4020 series page 17 for options. Si...

  • Page 16

    Top jamb (push side) mounting maximum opening can be templated for 100°, a = 6” (152 mm) b = 12 3/8” (314 mm) 140°, a = 4” (102 mm) b = 10 3/8” (264 mm) or 180°. A = 2” (51 mm) b = 8 3/8” (213 mm) hold-open points up to maximum opening or 140° , whichever is less, for hold-open or fusible link arm. ...

  • Page 17

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4020 series cylinders cylinder, 4020-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4020 series page...

  • Page 18

    Lcn 4020 series indicates recommended range of door width for closer size. How-to-order 4020 series closers 1. Select cylinder size 4021 (adjustable from size 1 to 5) 4026 (del not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, lig...

  • Page 19

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4020t series closer is shipped with standard arm, standard track, track roller, standard plastic cover, and self reaming and tapping screws. See 402...

  • Page 20

    Top jamb (pull side) mounting maximum opening templating allows 180° with standard track arm, limited to 100° with optional bumper installed. Consult factory if door will be held open at 180° hold-open points at 80°, 85°, 90°, 95°, or 100° with hold-open tracks. Please note that many track style doo...

  • Page 21

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4020t series cylinders cylinder, 4020t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4020t series p...

  • Page 22

    Lcn 4020t series installation accessories plate, 4020t-18 required where head frame is less than 3 7/8” (98 mm). Plate requires minimum 1 3/4” (44 mm) frame face. Track bumper, 4020t-169 mounts in track to assist backcheck, not replace auxiliary stop. Limits maximum opening. Consists of bumper, bump...

  • Page 23

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. How-to-order 4020t series closers 1. Select cylinder size 4021t (ada) 4023t 4024t 2. Specify hand ...

  • Page 24: Notes

    24 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 25

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4030 series closer is shipped with forged regular arm, metal cover and wood/self-tapping machine screw pack. See 4030 series pages 30 & 31 for optio...

  • Page 26

    Hinge (pull) side mounting maximum opening can be templated for 180°. Hold-open points up to maximum opening with hold-open arm. Lcn 4030 series butt hinges should not exceed 5” (127 mm) in width. Auxiliary stop is recommended at hold-open point or where a door cannot swing 180°. Reveal should not e...

  • Page 27

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series top jamb (push side) mounting maximum opening can be templated for 180°. Hold-open points up to maximum opening with hold-open arm. Butt hing...

  • Page 28

    Parallel arm (push side) mounting regular or hold-open arm mounting requires pa shoe, 4030-62pa for regular or hold-open arms. Add prefix "p" to closer description (eg. P4031). P4031 closer includes 4030-201 fifth hole spacer to support pa shoe. Maximum opening regular or hold-open arms can be templ...

  • Page 29

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series 4030 cush mount cush-n-stop or spring cush mounting 4031 closers ordered with cush or spring cush arms include 4030-201 fifth hole spacer to ...

  • Page 30

    30 lcn 4030 series cylinders cylinder, 4031-3071 standard, non-handed cast iron cylinder assembly. Arms regular arm, 4030-3077 non-handed arm mounts hinge side or top jamb. P4031 closer includes pa shoe, 4030-62pa is required for parallel arm mounting. Light duty arm, 4030-3077ld optional non-handed...

  • Page 31

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series 72mc 30 62a 31 c o v e r s cover, 4030-72mc non-handed metal cover. I n s ta l l ation accessories p l ate, 4030-18tj required for top jamb m...

  • Page 32

    How-to-order 4030 series closers 1. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cylinder, - standard metal cover, - regular arm - wood and self-tapping machine screw pack unless options listed bel...

  • Page 33

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series available not available closer available with less than 5.0 lbs. Opening force on 36" door. **maximum opening/hold-open point with standard ...

  • Page 34

    Hinge (pull) side mounting maximum opening can be templated for 180°. Consult factory if door will be held open at 180° hold-open points up to maximum opening with hold-open option. Please note that many track style door closers are capable of allowing 180° of door swing. Be aware that the majority ...

  • Page 35

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series top jamb (pull side) mounting maximum opening can be templated for 180°. Consult factory if door will be held open at 180° hold-open points ...

  • Page 36

    Stop face (push side) mounting maximum opening can be templated for 110°. Hold-open points up to maximum opening with hold-open option. Please note that many track style door closers are capable of allowing 180° of door swing. Be aware that the majority of track style closers are at their weakest cl...

  • Page 37

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series cylinders cylinder, 4031t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4030t-72mc non-handed metal cover. Arms stand...

  • Page 38

    How-to-order 4030t series closers 1. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cylinder - standard metal cover, - standard track - standard arm - track roller - wood and self-tapping machine scr...

  • Page 39

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4040 series closer shipped with regular arm, standard plastic clip-on cover, and self reaming and tapping screws. See 4040 series pages 45-47 for op...

  • Page 40: 4040Xp

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”. Closer mounts parallel arm (eda arm) on either right or left swinging...

  • Page 41

    Hinge (pull) side mounting maximum opening templating allows up to 120°. Hold-open points 90° up to 120° with hold-open arm. Lcn 4040 series butt hinges should not exceed 5” (127 mm) in width. Auxiliary stop is recommended at hold-open point or where a door cannot swing beyond 120°. Reveal should no...

  • Page 42

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series top jamb (push side) mounting maximum opening templating allows up to 120°. Hold-open points 85° up to 120° with hold-open arm. Butt hinges s...

  • Page 43

    Lcn 4040 series parallel arm (push side) mounting optional mounting requires pa shoe, 4040-62pa for regular or hold- open arms. Add prefix "p" to closer description (eg. P4041). P4041 closer includes 4040-201 fifth hole spacer to support pa shoe. Maximum opening 180° opening/hold-open points with al...

  • Page 44

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series clearance for 4040-62eda is 5 1/2” (140 mm) from door face. 6” (152 mm) for cush. Head frame flush or rabetted requires cush flush panel adap...

  • Page 45

    Lcn 4040 series c y l i n d e r s cylinder, 4041-3071 standard, non-handed cast iron cylinder assembly. Cylinder, 4040xp-3071 heavy duty, non-handed cast iron cylinder assembly. C o v e r s cover, 4040-72 standard, non-handed plastic clip-on cover. M e tal cover, 4040-72mc optional, handed cover. Re...

  • Page 46

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series arms cont. C u s h - n - s t o p ® arm, 4040-3077cns optional, non-handed parallel arm features solid forged steel main arm and forearm with ...

  • Page 47

    Lcn 4040 series installation accessories cont. Cush shoe support, 4040-30 provides anchorage for fifth screw used with cush arms, where reveal is less than 3 1/16” (78 mm). Blade stop spacer, 4040-61 required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop. Pa flush panel adapter, 4040-4...

  • Page 48

    How-to-order 4041 series closers 1. Select finish. Standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard clip-on cover, - regular arm, - self-reaming and tapping screws, unless options listed below are selected. Closer o...

  • Page 49

    How-to-order 4040xp series closers 1. Select finish. Standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard clip-on cover, - specify arm when ordering, - self-reaming and tapping screws, unless options listed below are se...

  • Page 50: Notes

    50 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 51

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4040t series closer is shipped with standard arm, standard track, track roller, standard plastic clip-on cover, and self reaming and tapping screws....

  • Page 52

    Hinge (pull) side mounting maximum opening templating allows 120° with standard arm, limited to 110° when optional bumper is installed. Hold-open points at 85°, 90°, 95°, 100°, 105° , or 110°, depending on the clip location in track. Please note that many track style door closers are capable of allo...

  • Page 53

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 top jamb (pull side) mounting maximum opening templating allows 180° with standard track arm, limited to 110° with optional bumper installed. Consult factory...

  • Page 54

    Stop face (push side) mounting maximum opening templating allows 120° with standard track arm, limited to 110° with optional bumper tracks. Hold-open points at 85°, 90°, 95°, 100°, 105° or 110° with hold-open tracks. Please note that many track style door closers are capable of allowing 180° of door...

  • Page 55

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040t series cylinders cylinder, 4041t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4040t-72 standard, non-handed plastic clip-on...

  • Page 56

    Lcn 4040t series 3034 installation accessories plate, 4040t-18 required for pull side (door mount) installations where top rail is less than 3 3/4” (95 mm). Plate requires minimum 1 3/4” (44 mm) top rail. Required for push side (door mount) installations where top rail is less than 5 1/4” (133 mm) m...

  • Page 57

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 how-to-order 4040t series closers 1. Specify finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will...

  • Page 58: Notes

    58 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 59

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4110 series closer is shipped with extra duty arm, standard plastic cover, 4110-201 fifth screw spacer and self reaming and tapping screws. See 4110...

  • Page 60

    Parallel arm (push side) mounting maximum opening eda or fusible link arm can be templated for 100°, a = 5 15/16” (151 mm) b = 7 1/4” (184 mm) 140°, a = 4 7/16” (113 mm) b = 5 3/4” (146 mm) or 180°. A = 2 15/16” (75 mm) b = 4 1/4” (108 mm) hold-open points up to maximum opening with heda or fusible ...

  • Page 61

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4110 series cylinders cylinder, 4110-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4110 series page...

  • Page 62

    H-cush arm 4110-3049cns optional non-handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. Spring cush arm, 4110-3077scns optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring...

  • Page 63

    How-to-order 4110 series closers 1. Select cylinder size 4111 (adjustable from size 1 to 5) 4116 (del, shcush or hcush arm not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: ...

  • Page 64: Notes

    64 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 65

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4110t series closer is shipped with standard arm, standard track, track roller, standard plastic cover and self reaming and tapping screws. See 4110...

  • Page 66

    Stop face (push side) mounting maximum opening templating allows 110° with standard track arm, limited to 100° with optional bumper tracks. Hold-open points at 85°, 90°, 95°, or 100° with hold-open tracks. Please note that many track style door closers are capable of allowing 180° of door swing. Be ...

  • Page 67

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4110t series cylinders cylinder, 4110t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4110t series p...

  • Page 68

    Lcn 4110t series 3034 installation accessories plate, 4110t-18 required where top rail, when measured from the stop, is less than 5 1/4” (133 mm). Plate requires minimum 2 1/4” (57 mm) minimum top rail. Track bumper, 4110t-169 mounts in track to assist backcheck, not replace auxiliary stop. Limits m...

  • Page 69

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. Door width 36" 42" 48" 8.5* lbs. N/a n/a n/a 5.0* lbs. 4111t 4111t 4111t reduced opening force 411...

  • Page 70: Notes

    70 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.

  • Page 71

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 4000t series closer is shipped with standard arm, standard track, track roller, standard plastic clip-on cover, and wood and machine screw pack. See 4000t se...

  • Page 72

    Wall pocket mounting cylinder mounts on wall. Track mounts on hinge side of door. Maximum opening templating allows 90° only. Hold-open point 90° with magnet. Dimension 1 is the distance from the centerline of the closer shaft to the centerline of the hinge or pivot. For pocket pivot or total door h...

  • Page 73

    Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4000t series cylinders cylinder, 4000t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4000t-72 standard, non-handed plastic clip-on...

  • Page 74

    Lcn 4000t series indicates recommended range of door width for closer size. How-to-order 4000t series closers 1. Select cylinder size 4003t 4004t 2. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cli...