Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 product comparison this chart shows a basic comparison of 4000 series closers. Refer to the specific closer chapter for complete details. 4000 series * indicates high security closer. Refer to that section of the catalog. “p...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 applications for aluminum, hollow metal, or wood swinging doors and frames. Can be used with hinge or pivot mounted door. Adapter plates and other installati...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4010 series closer is shipped with regular arm, standard plastic c o v e r, and self reaming and tapping screws. See 4010 series pages 5 & 6 for opt...
Hinge (pull) side mounting maximum opening can be templated for 100°, a = 5 15/16” (151 mm) b = 11 15/16” (303 mm) or 140°. A = 4 3/16” (106 mm) b = 10 3/16” (259 mm) hold-open points up to maximum opening with hold-open arm. Arm clearance above door. Regular arm requires c = 1 1/16” (27 mm). Hold-o...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4010 series cylinders cylinder, 4010-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4010 series page...
Lcn 4010 series installation accessories plate, 4010-18 required where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) top rail. 18 6 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10
Indicates recommended range of door width for closer size. How-to-order 4010 series closers 1. Select cylinder size 4011 (adjustable from size 1 to 5) 4016 (del not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black...
8 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4010t series closer is shipped with standard arm, standard track, track roller, standard plastic cover, and self reaming and tapping screws. See 401...
Hinge (pull) side mounting maximum opening templating allows 180° with standard arm, limited to 120° when optional bumper is installed. Consult factory if door will be held open at 180° hold-open points at , 90°, 95°, 100°, 105°, 110° or 120°, depending on the clip location in track. Please note tha...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4010t series cylinders cylinder, 4010t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4010t series p...
Lcn 4010t series 3034 installation accessories plate, 4010t-18 required where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) top rail. Track bumper, 4010t-169 mounts in track to assist backcheck, does not replace auxiliary stop. Limits maximum opening. Consists of bumper, bu...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. Reduced opening force 4010t closers caution ! Any manual door closer, including those certified by...
14 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4020 series closer is shipped with regular arm, standard plastic cover, and self reaming and tapping screws. See 4020 series page 17 for options. Si...
Top jamb (push side) mounting maximum opening can be templated for 100°, a = 6” (152 mm) b = 12 3/8” (314 mm) 140°, a = 4” (102 mm) b = 10 3/8” (264 mm) or 180°. A = 2” (51 mm) b = 8 3/8” (213 mm) hold-open points up to maximum opening or 140° , whichever is less, for hold-open or fusible link arm. ...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4020 series cylinders cylinder, 4020-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4020 series page...
Lcn 4020 series indicates recommended range of door width for closer size. How-to-order 4020 series closers 1. Select cylinder size 4021 (adjustable from size 1 to 5) 4026 (del not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, lig...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4020t series closer is shipped with standard arm, standard track, track roller, standard plastic cover, and self reaming and tapping screws. See 402...
Top jamb (pull side) mounting maximum opening templating allows 180° with standard track arm, limited to 100° with optional bumper installed. Consult factory if door will be held open at 180° hold-open points at 80°, 85°, 90°, 95°, or 100° with hold-open tracks. Please note that many track style doo...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4020t series cylinders cylinder, 4020t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4020t series p...
Lcn 4020t series installation accessories plate, 4020t-18 required where head frame is less than 3 7/8” (98 mm). Plate requires minimum 1 3/4” (44 mm) frame face. Track bumper, 4020t-169 mounts in track to assist backcheck, not replace auxiliary stop. Limits maximum opening. Consists of bumper, bump...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. How-to-order 4020t series closers 1. Select cylinder size 4021t (ada) 4023t 4024t 2. Specify hand ...
24 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4030 series closer is shipped with forged regular arm, metal cover and wood/self-tapping machine screw pack. See 4030 series pages 30 & 31 for optio...
Hinge (pull) side mounting maximum opening can be templated for 180°. Hold-open points up to maximum opening with hold-open arm. Lcn 4030 series butt hinges should not exceed 5” (127 mm) in width. Auxiliary stop is recommended at hold-open point or where a door cannot swing 180°. Reveal should not e...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series top jamb (push side) mounting maximum opening can be templated for 180°. Hold-open points up to maximum opening with hold-open arm. Butt hing...
Parallel arm (push side) mounting regular or hold-open arm mounting requires pa shoe, 4030-62pa for regular or hold-open arms. Add prefix "p" to closer description (eg. P4031). P4031 closer includes 4030-201 fifth hole spacer to support pa shoe. Maximum opening regular or hold-open arms can be templ...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series 4030 cush mount cush-n-stop or spring cush mounting 4031 closers ordered with cush or spring cush arms include 4030-201 fifth hole spacer to ...
30 lcn 4030 series cylinders cylinder, 4031-3071 standard, non-handed cast iron cylinder assembly. Arms regular arm, 4030-3077 non-handed arm mounts hinge side or top jamb. P4031 closer includes pa shoe, 4030-62pa is required for parallel arm mounting. Light duty arm, 4030-3077ld optional non-handed...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030 series 72mc 30 62a 31 c o v e r s cover, 4030-72mc non-handed metal cover. I n s ta l l ation accessories p l ate, 4030-18tj required for top jamb m...
How-to-order 4030 series closers 1. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cylinder, - standard metal cover, - regular arm - wood and self-tapping machine screw pack unless options listed bel...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series available not available closer available with less than 5.0 lbs. Opening force on 36" door. **maximum opening/hold-open point with standard ...
Hinge (pull) side mounting maximum opening can be templated for 180°. Consult factory if door will be held open at 180° hold-open points up to maximum opening with hold-open option. Please note that many track style door closers are capable of allowing 180° of door swing. Be aware that the majority ...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series top jamb (pull side) mounting maximum opening can be templated for 180°. Consult factory if door will be held open at 180° hold-open points ...
Stop face (push side) mounting maximum opening can be templated for 110°. Hold-open points up to maximum opening with hold-open option. Please note that many track style door closers are capable of allowing 180° of door swing. Be aware that the majority of track style closers are at their weakest cl...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4030t series cylinders cylinder, 4031t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4030t-72mc non-handed metal cover. Arms stand...
How-to-order 4030t series closers 1. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cylinder - standard metal cover, - standard track - standard arm - track roller - wood and self-tapping machine scr...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4040 series closer shipped with regular arm, standard plastic clip-on cover, and self reaming and tapping screws. See 4040 series pages 45-47 for op...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”. Closer mounts parallel arm (eda arm) on either right or left swinging...
Hinge (pull) side mounting maximum opening templating allows up to 120°. Hold-open points 90° up to 120° with hold-open arm. Lcn 4040 series butt hinges should not exceed 5” (127 mm) in width. Auxiliary stop is recommended at hold-open point or where a door cannot swing beyond 120°. Reveal should no...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series top jamb (push side) mounting maximum opening templating allows up to 120°. Hold-open points 85° up to 120° with hold-open arm. Butt hinges s...
Lcn 4040 series parallel arm (push side) mounting optional mounting requires pa shoe, 4040-62pa for regular or hold- open arms. Add prefix "p" to closer description (eg. P4041). P4041 closer includes 4040-201 fifth hole spacer to support pa shoe. Maximum opening 180° opening/hold-open points with al...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series clearance for 4040-62eda is 5 1/2” (140 mm) from door face. 6” (152 mm) for cush. Head frame flush or rabetted requires cush flush panel adap...
Lcn 4040 series c y l i n d e r s cylinder, 4041-3071 standard, non-handed cast iron cylinder assembly. Cylinder, 4040xp-3071 heavy duty, non-handed cast iron cylinder assembly. C o v e r s cover, 4040-72 standard, non-handed plastic clip-on cover. M e tal cover, 4040-72mc optional, handed cover. Re...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040 series arms cont. C u s h - n - s t o p ® arm, 4040-3077cns optional, non-handed parallel arm features solid forged steel main arm and forearm with ...
Lcn 4040 series installation accessories cont. Cush shoe support, 4040-30 provides anchorage for fifth screw used with cush arms, where reveal is less than 3 1/16” (78 mm). Blade stop spacer, 4040-61 required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop. Pa flush panel adapter, 4040-4...
How-to-order 4041 series closers 1. Select finish. Standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard clip-on cover, - regular arm, - self-reaming and tapping screws, unless options listed below are selected. Closer o...
How-to-order 4040xp series closers 1. Select finish. Standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard clip-on cover, - specify arm when ordering, - self-reaming and tapping screws, unless options listed below are se...
50 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4040t series closer is shipped with standard arm, standard track, track roller, standard plastic clip-on cover, and self reaming and tapping screws....
Hinge (pull) side mounting maximum opening templating allows 120° with standard arm, limited to 110° when optional bumper is installed. Hold-open points at 85°, 90°, 95°, 100°, 105° , or 110°, depending on the clip location in track. Please note that many track style door closers are capable of allo...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 top jamb (pull side) mounting maximum opening templating allows 180° with standard track arm, limited to 110° with optional bumper installed. Consult factory...
Stop face (push side) mounting maximum opening templating allows 120° with standard track arm, limited to 110° with optional bumper tracks. Hold-open points at 85°, 90°, 95°, 100°, 105° or 110° with hold-open tracks. Please note that many track style door closers are capable of allowing 180° of door...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4040t series cylinders cylinder, 4041t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4040t-72 standard, non-handed plastic clip-on...
Lcn 4040t series 3034 installation accessories plate, 4040t-18 required for pull side (door mount) installations where top rail is less than 3 3/4” (95 mm). Plate requires minimum 1 3/4” (44 mm) top rail. Required for push side (door mount) installations where top rail is less than 5 1/4” (133 mm) m...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 how-to-order 4040t series closers 1. Specify finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will...
58 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4110 series closer is shipped with extra duty arm, standard plastic cover, 4110-201 fifth screw spacer and self reaming and tapping screws. See 4110...
Parallel arm (push side) mounting maximum opening eda or fusible link arm can be templated for 100°, a = 5 15/16” (151 mm) b = 7 1/4” (184 mm) 140°, a = 4 7/16” (113 mm) b = 5 3/4” (146 mm) or 180°. A = 2 15/16” (75 mm) b = 4 1/4” (108 mm) hold-open points up to maximum opening with heda or fusible ...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4110 series cylinders cylinder, 4110-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4110 series page...
H-cush arm 4110-3049cns optional non-handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. Spring cush arm, 4110-3077scns optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring...
How-to-order 4110 series closers 1. Select cylinder size 4111 (adjustable from size 1 to 5) 4116 (del, shcush or hcush arm not available) 2. Specify hand rh lh 3. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: ...
64 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 standard 4110t series closer is shipped with standard arm, standard track, track roller, standard plastic cover and self reaming and tapping screws. See 4110...
Stop face (push side) mounting maximum opening templating allows 110° with standard track arm, limited to 100° with optional bumper tracks. Hold-open points at 85°, 90°, 95°, or 100° with hold-open tracks. Please note that many track style door closers are capable of allowing 180° of door swing. Be ...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4110t series cylinders cylinder, 4110t-3071 standard, handed cast iron cylinder assembly. For various applications see “table of sizes” on 4110t series p...
Lcn 4110t series 3034 installation accessories plate, 4110t-18 required where top rail, when measured from the stop, is less than 5 1/4” (133 mm). Plate requires minimum 2 1/4” (57 mm) minimum top rail. Track bumper, 4110t-169 mounts in track to assist backcheck, not replace auxiliary stop. Limits m...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 indicates recommended range of door width for closer size. Door width 36" 42" 48" 8.5* lbs. N/a n/a n/a 5.0* lbs. 4111t 4111t 4111t reduced opening force 411...
70 lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 notes.
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 4000t series closer is shipped with standard arm, standard track, track roller, standard plastic clip-on cover, and wood and machine screw pack. See 4000t se...
Wall pocket mounting cylinder mounts on wall. Track mounts on hinge side of door. Maximum opening templating allows 90° only. Hold-open point 90° with magnet. Dimension 1 is the distance from the centerline of the closer shaft to the centerline of the hinge or pivot. For pocket pivot or total door h...
Lcn closers 121 w. Railroad ave. P.O. Box 100 princeton, il, usa 61356-0100 phone 800-526-2400 fax 800-248-1460 www.Lcn.Ingersollrand.Com 3/10 lcn 4000t series cylinders cylinder, 4000t-3071 standard, non-handed cast iron cylinder assembly. Covers cover, 4000t-72 standard, non-handed plastic clip-on...
Lcn 4000t series indicates recommended range of door width for closer size. How-to-order 4000t series closers 1. Select cylinder size 4003t 4004t 2. Select finish standard powder coat __________ aluminum, dark bronze , statuary, light bronze, black, brass. Closer will be shipped with: - standard cli...