1. DL manuals
  2. LCN
  3. Temperature Controller
  4. LCN-GTS6
  5. Installation Manual

LCN LCN-GTS6 Installation Manual

Summary of LCN-GTS6

  • Page 1

    1 sensor-keypad with the lcn-gt6 (lcn-gts6) is a 6-key sensor-keypad for the t-port. The integrated temperature sensor can be used on (juni 2013) or after. The sensor keys are each equipped with an additional status-led and a blue background light. ® a corona - surrounding light with white led´s, se...

  • Page 2: Lcn-Gts6

    2 scope of delivery lcn-gt6 (lcn-gts6), mounting plate, 2 screws 3,2 x 15mm & inlay sheet (blank). How it functions the sensor keys of the lcn-gt6 (lcn-gts6) react to a touch on the glass surface. Depending on the duration of touch, an appropriate lcn-control command (hit, l ong or r elease ) will b...

  • Page 3: Lcn-Gts6

    3 the , background led´s are controlled over the led-command “gt-brightness”. The bright- ® ness of the corona -surrounding light and the o-light is in several steps and the blue key- background led´s can be switched on/off. Installation (an lcn-upp with a high (dim-) load would falsify the measured...

  • Page 4: Lcn-Gts6

    5 a3 a1 a4 a2 a5 a6 a1 a2 a3 a2 a1 getting into operation requirements: lcn bus module with firmware 1706.. (june 2013) or after, if you do not use the integrated temperature sensor, even with 120c05 (december 2010) or after. Settings: the key assigment (key-mapping): according to customers wishes, ...

  • Page 5: Lcn-Gts6

    4 1. Insert guiding pins at an angle from the bottom 2. Engage to the bottom corners in a slanted movement 3. Press the lcn-gt6 towards the wall, lock slides on the side when installing, firstly join the t-port cable to the connected up(x) module onto the wall. At the bottom area, the lcn-gt6 must b...

  • Page 6: Lcn-Gts6

    6 inscription you will find the inscription software gt-designer on our homepage lcn.De in the download area, for creating captions on your gt-inlays. The inlay must be cut to 61mm * 75mm. Standard 80g printing paper is appropriate and easy to handle. Semi-transparent paper/plastic sheet is even bet...

  • Page 7: Lcn-Gts6

    7 brightness / power supply lcn-nui the application of a power supply lcn-nui is required ® when the blue background light and/or the corona surrounding lights are being used. Apart from that, the red status led´s will light up brighter, that is important with direct sunlight or when a reading preci...

  • Page 8: Lcn-Gts6

    Issendorff kg, d-31157 sarstedt lcn-gt6 gb 05/2015 8 technical information and images are non binding. Changes are reserved. Technical hotline: +49 5066 998844 or www.Lcn.De technical data connection power supply lcn-connection: sliding contacts to connect to the mounting frame function keys: 6 capa...