LCT LCTSD318 User Manual

Manual is about: ALLARMED SPEED DOME

Summary of LCTSD318

  • Page 1

    Lct0804/ver.1.0 www.Hrcctv.Com allarmed speed dome user manual lctsd318 lctsd326 lctsd336.

  • Page 2

    User manual lctsd318-326-336 pag. 2 www.Hrcctv.Com norme generali di sicurezza - general safety recommendations sicurezza delle persone - safety warnings leggere e seguire le istruzioni - tutte le istruzioni per la sicurezza e per l'operatività devono essere lette e seguite prima che il prodotto sia...

  • Page 3

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 3 summary 1. Introduction............................................................................................................................... 4 1.1 technical specific ............................................................................

  • Page 4

    User manual lctsd318-326-336 pag. 4 www.Hrcctv.Com 1. Introduction 1.1 technical specific specifics details preset 220 tour 4 – max 27 preset cruise 4 pattern 4 horizontal movimento 360° ; speed 300°/sec. Osd password ok proportional pan/tilt ok day/night auto, color, night (select) s/n ratio >50db ...

  • Page 5

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 5 1.2 side identification 1. Bracket of wall to fix 2. Threaded inside attack 3. Drip 4. Inside custody 5. Security hook 6. Fan 7. Heating up plate 8. Hook-up lever and quick shell out 9. Hook tack on of security 10. Speed dome block off 11. Objective...

  • Page 6

    User manual lctsd318-326-336 pag. 6 www.Hrcctv.Com 2. Installation 2.1 preparations precautions • qualified and experienced person can carry out the installation. In many countries and areas licensed people is required. • before the installation and connection put off the camera . • do not putin the...

  • Page 7

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 7 fig.3 fig.4 3. Connect cables. Connect these cables into the relative connector relative: a. Video signal - bnc female connector. B. Rs485+a and rs485-b terminal box. Open the screw of clamps put in the cables and close .Attention to the polarity el...

  • Page 8

    User manual lctsd318-326-336 pag. 8 www.Hrcctv.Com d. In/out alarm clamps 8 in put with 1 common of reference ( the in put must to pilot at clean contacts). 1 output alarm to relay (common, nc e no); max. 30v, 1a. 2.4 switches adjustment for access to the 2 dip-switches reverse the block of speed do...

  • Page 9

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 9 the protocol of communication that need to use is assigned by dip swicthes 1-2-3-4-5- 6 sw 1 protocol dip 1-6 protocol switch position protocol switch position pelco pd (default) lilin pelco c kalatel pelco pdc vicon the factory start up is : pelco ...

  • Page 10

    User manual lctsd318-326-336 pag. 10 www.Hrcctv.Com 3. Menu configuration to understand the potentiality of lctsd camera high speed dome,system see the followed illustration. Video wiring note,come true with usual coaxial cable or twisted cable and the bus rs485 for the speed dome management. At the...

  • Page 11

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 11 3.2 boot-up screen when the speed dome power on , the device wants a few seconds for boot up information will display on screen and will conduct self-testing.Will show on the screen until “booting success”. Protocol : display the protocol in use, s...

  • Page 12

    User manual lctsd318-326-336 pag. 12 www.Hrcctv.Com 3.3 menu explanation the main menu is subdivide in 7 sub menu . System setup (pag.13) • site info : dome id, name, broadcast address. • display setup : screen display. • boot-up screen : display boot-up information on/off. • password : change passw...

  • Page 13

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 13 site info display setup boot-up screen password default system reboot back 3.4 system setup site info the menu permits to use have dome information. : the parameter is not changeable and display that address is be assigned to the speed dome by dip-...

  • Page 14

    User manual lctsd318-326-336 pag. 14 www.Hrcctv.Com zoom speed: digital zoom: joystick af/ai: autofocus time: autoiris time: alc: day/night back password in this menu is possible to bump up the security level if the password is enable. :for input the password the next sub menu display . Before to ch...

  • Page 15

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 15 sensibility freeze mode: white balance: blc mode back autofocus time in this menu is possible disarm/arm off > if on is up , select seconds 0-255 >, in here the dome can be manually controlled, this function consent to restore auto focus automated ...

  • Page 16

    User manual lctsd318-326-336 pag. 16 www.Hrcctv.Com auto stop time speed amplify proportional p/t set north: back preset tour cruise pattern zone park time: park action: back blc mode select this option to access in sub menu and arm on > or disarm off > the function. 3.7 pan/tilt setup auto stop tim...

  • Page 17

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 17 preset tour cruise pattern zone park time: park time: back preset no: name: current setup test next test remove current back preset tour cruise pattern zone park time: park action: back preset tour cruise pattern zone park time: park action: back c...

  • Page 18

    User manual lctsd318-326-336 pag. 18 www.Hrcctv.Com preset tour cruise pattern zone park time: park time: back pattern numbe: record: test: run back preset tour cruise pattern zone park time: park action: back zona number: name: left limit: right limit: remove speed run back mask number: mask setup ...

  • Page 19

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 19 privacy mask select to enter sub menu and control 8 masking zones. : select mask zone number. : set the position and size of the masking zone. Before to mask, make sure with camera just be position to the cover zone. Up on in menu is not possible t...

  • Page 20

    User manual lctsd318-326-336 pag. 20 www.Hrcctv.Com alarm select to enter sub menu and control input and output alarm. : for each input alarm , is possible associate preset or select 1 to the 4 tour, cruise or pattern setup. : on/off. Select arm/disarm output relay. : arm or disarm the alarm system....

  • Page 21

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 21 4. Appendix dip-switch and address setting chart id 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 on on on 2 on 3 on on 4 on 5 on on 6 on on 7 on on on 8 on 9 on on 10 on on 11 on on 0n 12 on on 13 on on on 14 on on on 15 on on on on 16 on 17 on on 18 on on 19...

  • Page 22

    User manual lctsd318-326-336 pag. 22 www.Hrcctv.Com 145 on on on 146 on on on 147 on on on on 148 on on on 149 on on on on 150 on on on on 151 on on on on on 152 on on on 153 on on on on 154 on on on 155 on on on on on 156 on on on on 157 on on on on on 158 on on on on on 159 on on on on on on 160 o...

  • Page 23

    User manual lctsd318-326-336 www.Hrcctv.Com pag. 23 technical specifications can be modified without any preliminary notice this manual may not be reproduced in whole or in part (except brief quotations in articles or magazines), without the 'written permission of hr europe. Memo.

  • Page 24

    User manual lctsd318-326-336 pag. 24 www.Hrcctv.Com hr europe s.R.L. Roma : sede legale e amministrativa; via giulianello, 1-7 – 00178 roma, italia – tel +39 06 7612912 fax +39 06 7612601 torino : sede operativa; via g.B.Feroggio, 10 – 10151 torino, italia – tel +39 011 453 53 23 fax +39 011 453 70 ...