LCT LCTSD318 User Manual - page 15
User Manual
LCTSD318-326-336
www.hrcctv.com
pag.
15
Sensibility
Freeze Mode:
White Balance:
BLC Mode
Back
Autofocus Time
In this menu is possible disarm/arm
Off
> If on is up , select seconds
0-255
>, In here the dome can be manually controlled, this
function consent to restore auto focus automated , After user time .
Autoiris Time
In this menu is possible disarm/arm
Off
> ,if on is up seconds
0-255
>.In here the dome can be manual IRIS, this function
consent to restore auto IRIS automated, after user time.
ALC
Select value between 0 and 31 for electronics shutter standard opening to define. The parameter is programmed if IRIS manual
control is up .
Default value : 23X
NOTE: Keep the default value is strongly recommended.
Day/Night
Arm
Auto
> or disarm
Off
> the Day/Night function.
3.6 CAMERA – Camera Setup
Sensibility
In This menu is possible to change setup time of the shutter, to get the light, that has to pass on the CCD sensor; time is most
high to open , more elevated show to light so CCD charget; the image always come out of more brightness .Time of show will be
smaller and image come out of more darkness. Select one of the next option :
x1-x2-x4-x8-x15-x30-x60 (Default)-x80-x90-x100-
x125-x180-x250-x350-x500-x725-x1000-x1500-x2000-x3000-x4000-x6000-x10000.
Freeze Mode
Arm
On
> or disarm
Off
> Freeze function for image freeze.
White Balance
Select modality between the next option:
Select this option, automatically carry out.
option for inside application .
option for outside application.
Auto Tracking White
.
Function automated of middle white balance
.
Do not use.
Select Manual, the video displays sub menu to adjust color red and blue manually.
WB-R : 000
WB-B : 000
Back
D
E
F
G
A
B
C
D
A
System
Lens
Camera
Pan/Tilt
Auto Running
Privacy Mask
Alarm
Back
B
C