LD AM8 User Manual - page 12
12
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Install the AUTOMIX8 software on a Windows PC (Windows Vista, WIN 7, WIN 8, screen resolution min. 1366 X 768) and connect the AM8 automatic
mixer to the Ethernet interface of the computer using a LAN cable (CAT-5). Since the IP address of the AM8 automatic mixer is factory set to
192.168.1.88, the interface of the computer must be assigned a different IP address (see figure “Properties of Internet Protocol Version 4”). Start
the AUTOMIX8 software, then click with the left mouse button on “MENU”, now move the mouse pointer to “CONNECT” and confirm by clicking
with the left mouse button. Click the blue “SEARCH” field in the opening window.
If all settings and connections are properly made, the connected device is displayed after a few seconds with its IP address and an INFO
window announcing “Search finished” (search completed) appears. Press “OK”. To enter the user name (USER NAME) and password (USER
PSW), now click on the blue “OK” field. The factory preset password for the user “admin” and “user” is “000000” (six times the number zero).
Press “OK”.
If several AM8 automatic mixers are daisy-chained, and should settings and control be operated by the AUTOMIX8 software, an individual IP
address must be assigned to each individual automatic mixer. The mixers must be connected to the software one by one. While the IP address
is changed, the automatic mixer is restarted. After changing the IP address, you must restart the software and the device must be connected
again. Use an Ethernet switch to connect several automatic mixers to a computer.