LDG AL-100 Operation Manual - page 4
AL-100 Operations Manual
Version 1.0
4
Specifications
•
0.1 to 100 watts SSB and CW peak power, 30W on digital modes.
•
Latching relays for ultra low power operation.
•
200 memories for instantaneous frequency and band changing.
•
Powered and controlled via radio interface cable.
•
Designed specifically for Alinco HF transceivers.
•
1.8 to 54.0 MHz coverage.
•
Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional
4:1 Balun.
•
For Dipoles, Verticals, Vees, Beams or any Coax Fed Antenna.
•
Dimensions: 5.5” W x 6.0” D x 1.2” H
.
•
Weight: 1 lb
Never install antennas or transmission lines over or near power lines. You
can be seriously injured or killed if any part of the antenna, support or
transmission line touches a power line. Always follow this antenna safety rule:
the distance to the nearest power line should be at least twice the length of
the longest antenna, transmission line or support dimension.
Specifications.
Always
operate
within these limits.
IMPORTANT
SAFETY WARNING