Le Club SWELL-6x10WH User Manual - 4 - Internal Menu
Swell-6x10WH - 6x10W white LEDs multi-beam rotating bar
Page 18
English
4 - Internal menu
MENU
UP and DOWN
Action
ENTER
DMX address selection
Press ENTER and select the adress with UP and DOWN
Saves
changes
1 channel : Select the pre-programmed sequences: 1 - 12
Press ENTER, mode
selection with UP
and DOWN.
Press MENU for more
than 3 seconds to
activate the DMX
mode.
Saves
changes
7 channels : TILT, TILT macros, TILT macros speed, Main dimmer,
Strobe, LED macros and LED macros speed
9 channels : Tilt, Main dimmer, Strobe, Individual LED dimmers
13 channels : TILT, TILT macros, TILT macros speed, Main dimmer,
Strobe, Individual LED dimmers, LED macros and LED macros
speed
Shows are music-sensitive.
Please make sure the music-sensitive mode is activated (menu Sound State).
Show 0 starts a 1 - 12 show sequencing.
Saves
changes
Modes Master, Slave1 and Slave 2 selection.
Press ENTER and use the UP and DOWN buttons to select a mode.
The Slave 2 mode reverses the PAN and TILT movements, and the sequences order in
relation to the master projector.
Saves
changes
Modify the TILT movements maximum amplitude (in degrees).
Saves
changes
Activates or deactivates the music-sensitive mode.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
Activates or deactivates the Black out mode.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
Activates or deactivates the display backlight.
Press ENTER and select On or Off with the UP and DOWN buttons.
When Off, the display automatically turns off after a 30-second inactivity period.
Saves
changes
Activates the TILT movement reversion when the Slave mode is activated, or in DMX
mode.
Press ENTER and select Normal or Inverse with UP and DOWN.
Saves
changes
Once turned on, the moving head will start a position initialisation for each motor. At this stage, the display indicates
. Once the initilisation is
over, the display will indicate
, you will then be able to access the menu using the MENU or ENTER buttons. If the menu remains inactive for 30
seconds, the display will indicate
and locks. To access the menu again, press ENTER.