Le Club Sword5R User manual - 4 - Internal Menu
English
Sword5R
- Beam moving head with Philips
©
MSD PLATINUM 5R lamp
Page 5
4 - Internal menu
4.1 - Menu tree and description of the functions
Your moving head will initialise the position of each motor upon activation.
The display will indicate
at this stage.
The display will then indicate
and you will be able to access the menu by pressing MENU or ENTER.
After a 30-second period of inactivity, the display will indicate
again and lock. Press ENTER to access it again.
MENU
UP and DOWN
Action
ENTER
DMX address selection.
Press ENTER, then use the UP and DOWN buttons to configure the address.
Saves changes
1
channel: built-in programs (1 to 4) selection
Press ENTER,
select a mode with UP and
DOWN.
Saves changes
10
channels: Pan, Tilt, Movement speed, Dimmer, Strobe,
Colour wheel, Gobo wheel, Prism, Prism rotation, Special
functions
14
channels: Pan, Tilt, Movement speed, Dimmer, Strobe,
Colour wheel, Gobo wheel, Prism, Prism rotation, Movements
macros, Movements macro speed, Special function
Show 1 :
PAN = 180° / TILT = 100°
Shows are music-sensitive.
Please make sure the music-sensitive mode is activated
(Sound State menu) and the microphone sensitivity has
been set (Sound Sense menu).
Please refer to chapter 4.3 for more details about the
shows.
Saves changes
Show 2 :
PAN = 180° / TILT = 100°
Show 3 :
PAN = 540° / TILT = 180°
Show 4 :
PAN = 540° / TILT = 100°
Allows you to activate the Master mode and adjust the behavior of slave devices:
- Slave 1: The slave device reproduces precisely the movement of the master device.
- Slave 2: The slave device reverses movements of the master device.
Saves changes
Configure the behaviour of your projector in the event of DMX signal failure:
•
Master
: The projector enters Master mode
•
Hold
: The projector holds onto the last information received
•
Blackout
: The projector blacks out
Saves changes
Activates or deactivates the music-sensitive mode.
Press ENTER and select On or Off via the UP and DOWN buttons.
Saves changes
Allows you to adjust the microphone sensitivity for music-sensitive modes.
000 indicates the microphone is deactivated.
Saves changes