Le Club Sword5R User manual - page 7
English
Sword5R
- Beam moving head with Philips
©
MSD PLATINUM 5R lamp
Page 7
4.2 - Configuring initial positions
Upon initialisation, your moving head will adjust its motors onto their initial positions.
You can modify such positions so they meet your needs.
To do so, enter the
DMX Address
menu, then press ENTER for 3 seconds. Adjustable positions are listed below:
4.3 - Movement limitations based on programs used
Show 1
Show 2
Show 3
Show 4
In order to prevent your moving head from projecting beams over unwanted areas (ceilings, room angles, etc.) when automatic mode is activated, each
show features its own PAN and TILT ranges. Please find below the movement limitations for each show.
180°
PAN
TILT
100°
PAN
TILT
180°
100°
PAN
TILT
540°
180°
PAN
TILT
540°
100°
PAN initial position settings.
TILT initial position settings.
Dimmer initial value settings.
Gobo wheel initial position settings.
Colour wheel initial position settings.
Prism initial position settings.
Frost filter initial position settings.
Focus initial position settings.