Leader LV5307 Instruction Manual - page 11
3
2.
2
1
PRODUCT FEATURES
General
Integrated Converter
Multi-Format Signal
3G-SDI (3Gb/sec 4:4:4 HD)
SDI-HDMI Loop Through
12-Bit Internal Processing
2K Input Capability
Peaking / Focus Assist
DSLR Scaling
Cinezone (False Colors Filter)
Under Monitor Display
Menu Jog Control
Integrated active SDI-HDMI and HDMI-SDI converter
allows the trasnparent conversion of HD to HDMI signal or
conversion of HDMI back to HD format
Leader monitors are compatible with various sources
including:
- HDMI (compatible with DVI)
- SDI signals: 3G (425 A/B), HD, SD
- CVBS (composite) and YPbPr (component)
SMPTE 425 compliant HD display that supports frame rates
of 50.60 in 1080p, 1080i, and 720p.
Supports full SMPTE 425 signal conversion transparency
from SDI to HDMI with test and measurement overlays
Allows for color temperature and gamma encoding changes
to be implemented quickly
Active Video Looping supports
full 1080p/60 frames on the HDMI output
2K content can be displayed on this Leader monitor
without the loss of HD signal by converting and
downscaling the content
Peaking filter shows if the image is out of focus in difficult
wide full range DSLR shots by highlighting areas that are out
of focus with a cross stripe pattern
Actively scales live video images to reduce the black areas of
the screen to allow for a full screen 16:9 image
Color filtering allows uses to display different areas of the
images as different colors to set portions of the scene as over
or under exposed
UMD function displays ancilliary data at the bottom of the
screen
Jog dial on the front of the monitor enables users to control
all features
Waveform Monitor
Vectorscope Monitor
Pixel to Pixel Mapping
De-Embedded Audio Level Meter
Aspect Format Markers
Gamma Encoding Select
Time Code
On screen display of video levels with respect to time, used
to calibrate multiple camera setups and vertical blanking level
and color burst
On screen display of chrominance information in Cb and Cr
channels
Display can be opaque or solid against the visual
display
1:1 Pixel mode displays the original image resolution without
scaling to match a certain resolution or an aspect ratio
De-embedded audio selected out
Auto sensing to display
three range meter of up to 16 channels
4:3, 14:9, 15:9, 16:9, etc. area, line, safety, center markers
display
Range from 1
0 to 3
0 users selectable
Factory default
setting is 2
8
Time code reader displays embedded LTC or VITC formats
H/V Delay
RJ-45 Remote Control
View the blanking area and synchronize signals by displaying
the horizontal and vertical intervals in the center of the screen
Plug in your RJ-45 connector to the back of the monitor and
communicate with other Leader monitors (RS-484 control /
Tally Light control)
US
O
RE
ST
RIT
O