Leadsun pbox x3 User Manual - page 8
3
. Troubleshooting
No.
Problems
Check
ing steps
Solutions
1
The light wouldn't
turn on.
Check if the power switch is ON.
Turn on the power switch.
Check if the solar panel is shaded.
Remove the items covered the solar panel,
or relocate the lamp to an unshaded
position.
Check if the solar panel is under a strong
light source.
Remove the light sources ,or relocate the
lamp to avoid the light source.
Check the APP on your phone, and see if
the power button is OFF.
Press the power button to turn on the light.
Use the real-time self-checking on your
APP for troubleshooting.
Contact the manufacturer for maintenance
after troubleshooting.
2
Extremely short
operating time at
night.
Check if the lamp is under any shade
caused by trees, buildings and etc.
Remove the items covered the solar panel,
or relocate the lamp to an unshaded
position.
Check if the solar panel is covered with
dust or other items.
Clean the surface of the solar panel, or
remove the items covered the solar panel.
Check if the operating mode set on your
APP is correct.
Reset the working mode to reduce the
lamp power or operating time .
Use the real-time self-checking on your
APP for troubleshooting.
Contact the manufacturer for maintenance
after troubleshooting.
No.
Problems
Checki
ng steps
Solutions
3
Would't charge
mobile devices.
Check if the USB charging cable is
broken.
Replace the USB charging cable.
Use the APP to check the power level of
the battery.
Recharge the PBOX X3 if the power level
of the battery is low.
Use the real-time self-checking on your
APP for trouble-shooting.
Contact the manufacturer for
maintenance after troubleshooting.
4
Bluetooth
connection
failed.
Check if your phone has installed the
LIVESUN APP.
Install the LIVESUN APP.
Check if the power switch (switch 1) is
ON.
Turn on the power switch (switch 1).
Restart the lamp.
Press the power switch (switch 1) to turn
off the lamp. Wait for 10s to restart the
lamp.
Check if it is out of battery.
Recharge the PBOX X3.
5
Music playing
function is failed.
(PX3BL only)
Check if your phone has
Installed the LIVESUN APP.
Install the LIVESUN APP.
Check if the power switch
(switch 1) is ON.
Turn on the power switch
(switch 1).
Use the APP in your phone to check with
the history data.
Feedback the latest history data to the
manufacturer for further analysis.
13
14
EN