Leadtek SecurityDVR LTR-3100 User Manual - Software Setup
Software Setup
When the system is not using the
Freeze or Zoom function, pressing
the SETUP button will display the
setup menu on the screen that
allows you to change the display
environment such as the channel
names, and the date and time
displayed on the screen, etc.
CHANNEL NAME
DATE/TIME
DISPLAY MODE
AUTO SWITCH
EXIT
SYSTEM SETUP
SELECT , PUSH ENTER KEY
Cursor Operation
Move the cursor around using the keys
listed below.
CH 1
CH 3
CH 2
ENTER
CH 4
Move the cursor one option
down in the menu lists
Change the setting to one
option up or the character to
the previous character
sequentially
Move the cursor one character
to the right in the sub-menu
Change the setting to one
option down or the character
to the next character
sequentially
Go to the submenu of the
selected option in the main
menu. And save the setting.
CHANNEL NAME
CH1: CAMERA 1
CH2: CAMERA 2
CH3: CAMERA 3
CH4: CAMERA 4
You can change the channel
names as desired. The channel
names are displayed on the
bottom of the screen or below
the sub-screens.
DATE/TIME
09 / 06 / 2001
18 : 22 : 5 4
The time and date displayed on
the screen can be changed here.
Time and date are displayed on
the upper-right corner of the
screen.
DISPLAY MODE
BORDER: WHITE
BLINK:
SEC
1.0
You can change the color of the
border and how fast the channel
numbers blinks when some
functions are used.
AUTO SWITCH
INTERVAL: SEC
0.2
QUAD MODE: OFF
The interval between a channel
and next in sequence modes can
be set here.
Main Menu
Sub-menu
Description
MANAGING DISPLAY ENVIRONMENT
MANAGING DISPLAY ENVIRONMENT
MANAGING DISPLAY ENVIRONMENT
MANAGING DISPLAY ENVIRONMENT
11
E-