Ò winfast quick installation guide digital tv card code: lr 66xx p/n: w05g0060 ver: b.
Table of contents connect input & output devices ........................... 1 board layout ........................................................... 2 hardware installation .............................................. 4 driver & application installation ............................ 5 recycling ...
If you are using an active antenna, please set the jumper, as circled in the photo to the right, to the enabled position. Otherwise, please leave it at the disabled position (default). Vcr input sources dvd/vcd player ccd camera ccd camera camcorder select start analog sony playstation video game co...
Vcr input sources dvd/vcd player ccd camera ccd camera camcorder select start analog sony playstation video game console pc monitor remote control remote control video in audio out audio in s-video out composite video out cable tv provider from antenna fm antenna board layout from cable tv dtv2000 h...
Cable tv provider from antenna (digital or analog) from cable tv (analog) fm air ant cable remote audio in video in note: for antenna: it can be connected to both digital and analog tv signal. For cable tv: only analog tv signal can be received by the cable (digital cable tv signal is not supported)...
Step 1: power off your pc. Open the computer case. Remove the coverplate of an unused expansion slot. Step 2: align the bus on the card with the pci slot. Step 3: gently press the winfast tv device down into the slot until you feel the edge of the bus reaches the bottom of the pci slot. Note that th...
Step 1 : turn on your pc and start up the windows. Step 2: shortly after entering the windows , you will see the found new hardware wizard dialog box. Click "cancel". Step 4: click on the driver item to begin the installation. Step 5: the wizard is extracting the files needed for the installation. T...
Step 6: you have to choose a language for the installation. Make the selection and click ok. Step 7: the wizard is ready to install the winfast entertainment center. Step 8: the installation is going to start. Click next. Step 9: the wizard will install the software for thehardware. Check "install t...
Step 10: the wizard has finished installing the software. Click finish. Step 11: you have to restart your computer. Click finish to reboot. Step 12: after reboot, the wizard will take care of the rest of the installation process. Step 13: the entire installation iscompleted. Now you are able to use ...
Thank you for choosing this leadtek product. Winfast tv device is an electronic device which may contain hazardous materials/components which need to be disposed of properly at the end of the product's life. You can help avoid hazardous risks by not disposing of the electronic device in your normal ...
