Leadtek W05G0060 Quick Installation Manual - page 6
Manual is about: Digital TV Card
of
10
Step 1:
Power off your PC. Open the computer case. Remove the coverplate
of an unused expansion slot.
Step 2:
Align the bus on the card with the PCI slot.
Step 3:
Gently press the WinFast TV device down into the slot until you feel
the edge of the bus reaches the bottom of the PCI slot. Note that the
capture card can be inserted into PCI slot in one direction only.
Step 4:
Secure the bracket of the card to your computer case with the screws.
Then fit the computer case cover back in place.
Step 5:
Connect the input sources and output devices to your capture card
following the instructions given in Connect Input and Output
Devicessection on the next page. Now you are ready to connect the
video sources to your capture card.
Hardware Installation
4