Lec TF6096W User Manual - Gb/ie
GB/IE
Instruction for use
•
Don’t stand or sit on the appliance, don’t
lean on the doors, wire shelves or shelves.
•
Do not use your appliance near heaters,
cookers or other sources of heat and fire.
•
In order to avoid any possibility of damage
or accident, do not place unstable objects
containing liquids or sources of fire on the top
of the appliance (such as flower vases, flower
pots, candles, lamps, etc.).
•
If you do not use it for a longer period of
time, please proceed as follows:
- take out the plug from the mains;
- empty the refrigerator and the freezer
- defrost and clean it
- leave the doors open to avoid unpleasant
smells
•
The supply cord can only be replaced by an
authorised person.
Appliance installation
This appliance must be used only for its
intended purpose, (household use), in
suitable areas, away from rain, moisture or
other atmospheric influences.
The correct installation is essential to provide
the operation of the appliance at its best.
The appliance must be placed far from any
source of heat and fire.
Installing the appliance in a hot room,
exposured to direct sunlight or placed near a
heat source (heaters, cookers, ovens),
increases the energy consumption and
reduces its life. Therefore, this appliance must
be installed only in rooms with doors and
windows which allow a good circulation of air.
When placing the appliance into your house,
please observe the following minimum
dimensions:
From Cookers 30 mm
From Radiators 300 mm
From Freezers 25 mm
Please provide free circulation of air around
the appliance, by observing the clearances
specified (Fig 2).
Please fit on the condenser (at the rear) the
supplied spacers (Fig 3).
•
Ensure the product is placed on a flat and
stable floor; you can level the appliance by
adjusting the front feet of the product (Fig 4).
•
Please keep a distance of min. 25 cm from
any furniture or units above the appliance.
This clearances should be maintained at all
times.
•
The appliance is a freestanding appliance
and is not suitable for building in.
•
Please fit the supplied accessories.
Ambient temperature
Ambient temperature is an important factor in
the operation of your appliance. This relates
directly to the inside temperature, if the
ambient temperature is correct the appliance
will operate at maximum effciency and this
extends the products life.
This appliance was designed to operate within
the design parameters (specified in the user
instructions and on the data badge) in a range
of ambient temperatures between +10 and
+32 degrees C (50 and 90 degrees F).
At ambient temperatures which are lower
or higher than quoted above, the
appliance may require adjusting
accordingly.
When ambient temperatures drop below
the lowest limit of 10
0
C, this may cause
the freezer compartment to become
warmer than is suitable. You will need to
adjust the temperature accordingly.
9