Leckey Easyseat User Manual - page 8
To slot your choice of legs into position,
it is important that you identify the left and
right hand side of the legs supplied.
When in position the popper and castor
fixing screw at the base should be in line
and facing away from the child. To slot the
legs into position push poppers (a), slide the
leg into the receiver and once the desired
slot is obtained, check that the poppers have
released and are positioned securely. It is
advisable when setting up your Easy Seat
that all the legs are initially in the same slot.
Always use caution to ensure finger do
not become trapped in the slot when
attaching the legs.
To mount the backrest to the seat you
should firstly remove the two allen bolts and
disc already attached at both sides of the
backrest. The back rest can then be placed
into position. To secure the backrest into
position the discs should be lined up with
the allen bolt receivers and then the two allen
bolts on either side of the backrest should
be re-positioned securely. It is important that
you position the discs on the outside of the
chair as shown in photograph.
7.1 Attaching the legs
7.2 Attaching the
Backrest