Lectronix Navion R5000 Quick Start Manual
Navion™ R5000 – Quick Start Guide
Use this quick start guide as a supplement to the Navion™ R5000 Operating Instructions Manual.
DISCLAIMER — THIS IS A DISCLAIMER OF LIABILITY AND DAMAGE RESPONSIBILITY AS REGARDS TO LECTRONIX,
INC. AND GARMIN RELATING TO YOUR USE OF THE LECTRONIX NAVION™ R5000 SYSTEM. READ IT CAREFULLY. YOU
ASSUME TOTAL RESPONSIBILITY AND RISK FOR USING THIS SYSTEM.
Failure to properly focus on the operation of your motor vehicle can result in death, serious injury and property
damage. This R5000 device should never be used at a time or in a manner that distracts you from properly focusing
on operation of the motor vehicle in which it is installed. Our concern is for your safety. We ask that you fully
cooperate with and share that concern.
Always operate the vehicle in a safe manner and in full compliance with speed limits, road safety signs and all other
laws and devices which regulate operation of a motor vehicle. Be and remain aware of driving conditions at all times
when using this system while operating a motor vehicle.
Operation of this unit, including its camera, navigation, audio and other features can be distracting to your operation
of the motor vehicle. While the system is intended to provide both entertainment and helpful vehicle and navigation
information, it is not intended to, nor should you allow it to distract you from properly focusing on operating the
motor vehicle in which it is installed. It is up to you to minimize or prevent such distraction.
ALARMS
The Navion™ R5000 continuously monitors system parameters and presents an
alarm when the parameter is outside of normal operating conditions. When there is
an alarm, an indicator in a red box appears in the background window, overriding
anything that is displayed in that window. You should take note of the alarm and
check your vehicle to correct the alarm condition. If there is an Alarm condition,
pressing INFO will take you to the Alarm screen.
Viewing Alarms
Select the INFO button and scroll to Alarm. Press the SEL button or wait until the
Alarm screen is automatically selected. A list of alarms will appear.
How to Monitor Alarm Information in a
Background Window
You can view one of the fields from the alarm display in the Background window
even when the status display is not the main Application.
1) To select an item for display in the background window. Use the
UP and DOWN arrow keys to highlight the status item for display.
2) Press the SEL button to select the item. A check box will appear next
to your selection. Selecting a different parameter will remove the
previous item from the display.
3) To remove an item from the background window. Move to the selected
item and press the SEL button again to uncheck the item.
NOTE: Selecting an item will override the information in the Background window
unless there is an Alarm condition.
Disabling and Enabling Alarms
1) When in the Alarm screen, use the UP and DOWN arrow keys to highlight
the alarm of interest.
2) Press the MINUS (-) key to disable the Alarm.
3) To enable an alarm, press the PLUS (+) key.
Caution! A disabled Alarm will not appear in the Background
window. There will be no Alarm notification. The Alarm must
be manually enabled to display in the Background window.
CLOCK AND DATE
The Navion™ R5000’s clock and date are always displayed on the main screen in the
lower left hand corner.
Setting the Clock and Date
1) Press the INFO button repeatedly until Clock is highlighted.
2) Press the SEL button to select Clock or wait until clock is automatically
selected.
3) Press SEL button to edit the time and date values.
4) Use the LEFT and RIGHT arrow keys to select the field you want to modify.
5) Use the UP and DOWN arrow keys to change the highlighted field
6) When all of the changes have been made, press the SEL button to return to
the Clock display.
CAMERA SYSTEMS
The R5000 supports up to three cameras. Mount the cameras on the vehicle so that
there is a left, right and a rear camera. The rear camera supports a microphone that
can be automatically activated when the RV is shifted into reverse.
Selecting Cameras
1) To display a camera view on the main window, press the CAM button.
2) Press the CAM button to highlight the camera of interest (Left, Right or
Rear). This will define this camera view as the “preferred” camera view.
3) Press the SEL button to display the camera view or wait until the camera is
automatically selected.
4) When the preferred camera is viewed, use the LEFT, RIGHT or DOWN arrow
keys to provide a quick view of the other cameras. The camera view will
display for approximately five seconds after which the camera view will
return to the preferred camera view.
Configuring the Camera Options
When in the CAM view, pressing the MENU button provides a list of camera
configuration options as shown below
Menu Option Description
Use Camera
Audio
Turns on the camera microphone. Once set, the
microphone remains active and will override any
entertainment audio sources when the camera view
is the active application.
Auto Reverse
Camera
Displays the rear camera view when the vehicle is
placed in reverse.
NOTE: If you have selected a preferred camera view
other than rear (i.e. left, right), then this auto reverse
selection will override your preferred selection and
switch to the rear camera view.
Auto Reverse
Microphone
Automatically turns on the microphone for the rear
camera when the vehicle is shifted into reverse. Audio
from other sources such as Radio, CD, or USB key will
be muted when the vehicle is shifted into reverse.
Auto Turn
Signal Camera Automatically switches the display to the left or right
camera when the left or right turn signal is activated.
When the turn signal is deactivated, the camera view
returns to the previous application.
NOTE: If Auto Reverse is enabled, then Auto Reverse
will take priority over Auto Turn Signal Camera.
Default to
Camera
When enabled the last camera viewed will be restored
if there is no activity in another application for
approximately 10 seconds.
Important System Information
Take a moment to fill in the following information for your records.
Description
Record Here
R5000 Serial Number
Date Installed or Purchase
Date of Coach
Sirius Satellite System
Identification number (SID)
Sirius Satellite Lock Code
!
Developed and Manufactured in the USA
Service, Technical Support and Warranty Contact
Lectronix, Inc. • 5858 Enterprise Drive • Lansing, MI 48911 • 1-888-423-1183 • support@lectronix.biz