- DL manuals
- Lectrosonics
- Sound Card
- DM812
- Installation Manual
Lectrosonics DM812 Installation Manual
Summary of DM812
Page 1
1 rio rancho, nm dm series installation guide 1 installation guide hardware and software dm series digital audio processors models dm1624, dm1612, dm812.
Page 2
2 dm series installation guide.
Page 3
3 rio rancho, nm dm series installation guide important safety instructions this symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure -- voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you...
Page 4
4 dm series installation guide installation specific information only this guide covers only installation related matters. See the reference guide additional details and explanations of the dm series digital processors. Unpack the unit and inspect the contents included in the box: reference manual p...
Page 5
5 rio rancho, nm dm series installation guide audio outputs all outputs are a balanced differential configuration. Some outputs include an attenuator to reduce the signal to mic level. Wiring is the same for either line or mic level, as indicated in the following illustrations. Note: using a line ou...
Page 6
6 dm series installation guide programmable inputs programmable inputs are provided to enable control over a variety of parameters. Each input can respond to either a contact closure or a continuous voltage. The diagram below shows common connections to the programmable input pins. Each programmable...
Page 7
7 rio rancho, nm dm series installation guide programmable inputs/ outputs - + - + rs232 - + - + 1 - gnd 2 - in 1 3 - in 3 4 - in 5 5 - in 7 6 - in 9 7 - in 11 8 - gnd 9 - out 1 10 - out 3 11- out 5 12 - out 7 13 - gnd 14 - +5v 15 - in 2 16 - in 4 17 - in 6 18 - in 8 19 - in 10 20 - +5v 21 - out 2 2...
Page 8: Master
8 dm series installation guide lectro made in the u.S.A. Programmable inputs/ outputs 1 - gnd 2 - in 12 3 - in 14 4 - in 16 5 - in 18 6 - in 20 7 - in 22 8 - gnd 9 - out 9 10 - out 11 11- out 13 12 - out 15 13 - gnd 14 - +5v 15 - in 13 16 - in 15 17 - in 17 18 - in 19 19 - in 21 20 - +5v 21 - out 10...
Page 9: Initial Setup
9 rio rancho, nm dm series installation guide connect your computer using either the black db9 to stereo mini (trs 1/8”) cable for rs-232 communica- tions or the usb cable for usb control. Multiple units may be connected using a usb hub (available at most electronic or office supply retailers). Both...
Page 10: Important
10 dm series installation guide important the minimum required setup is necessary before the dm processor will pass audio: inputs setup - matrix setup - outputs setup the minimum setup can also be accomplished using the front panel lcd interface. Important - any changes made during setup must be sav...
Page 11: Installing Lecnet2
11 rio rancho, nm dm series installation guide installing lecnet2 ™ software and usb driver this graphical user interface (gui) is designed to allow easy setup and monitoring of dm components using a computer system running under the windows ® 2000 or xp operating system. Installing lecnet2 ™ softwa...
Page 12
12 dm series installation guide 5. When the driver installation is complete, the final page of the wizard appears. Click finish to complete the lecnet2 usb driver installation. Installation additional units (or lecnet 2 devices) the windows xp operating system regards all lecnet2 devices as separate...
Page 13
13 rio rancho, nm dm series installation guide usb driver installation (windows 2000) first time installation when a lecnet2 device is connected to the pc for the very first time, the windows found new hardware wizard automatically opens. Use the following proce- dure to install the lecnet2 usb driv...
Page 14
14 dm series installation guide.
Page 15
15 rio rancho, nm dm series installation guide.
Page 16: Limited One Year Warranty
16 dm series installation guide 581 laser road, rio rancho, nm 87124 usa tel (800) 821-1121 or (505) 892-4501 fax (505) 892-6243 e-mail: sales@lectrosonics.Com web site: www.Lectrosonics.Com limited one year warranty the equipment is warranted for one year from date of purchase against defects in ma...