M2r digital iem receiver instruction manual rio rancho, nm, usa www.Lectrosonics.Com fill in for your records: serial number: purchase date: quick start summary 1) install receiver batteries (pg. 6). 2) power unit on with on/off and volume knob (pg. 4). 3) scan for an available frequency (pg.9). 4) ...
M2r lectrosonics, inc. 2 note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ...
Digital iem receiver rio rancho, nm 3 m2r digital iem receiver the m2r digital iem receiver is a compact, rugged body-worn unit providing studio-grade sound quality for performers or any professionals needing to monitor detailed audio wirelessly. The m2r employs advanced antenna diversity switching ...
M2r lectrosonics, inc. 4 panels and features usb port battery compartment door belt clip mounting sockets headphone output ir (infrared) port on/off and volume knob rf link led battery status led.
Digital iem receiver rio rancho, nm 5 battery status led when the battery status led on the keypad glows green the batteries are good. The color changes to red at a midpoint during the runtime. When the led begins to blink red, only a few minutes remain. The exact point at which the led turns red wi...
M2r lectrosonics, inc. 6 lcd main window battery life indicator receiver name rf level audio level diversity activity rf level the triangle graphic corresponds to the scale on the left side of the display. The scale indicates the incom- ing signal strength in microvolts, from 1 uv at the bot- tom to...
Digital iem receiver rio rancho, nm 7 navigating the menus from the main window, press menu/sel to enter the menu, then navigate with the up and down arrows to highlight the desired setup item. Press menu/sel to enter the setup screen for that item. Refer to the menu map on the following page. Press...
M2r lectrosonics, inc. 8 lcd menu map the menus presented on the lcd are arranged in a straightforward manner, with those that are likely to be used more often located at the top of the tree. Scan flexlist frequency sel back sel back frequency 548.900 900 sel back vol/bal sel back mixer sel back lim...
Digital iem receiver rio rancho, nm 9 menu item descriptions scan use the scan function to identify a usable frequency. The area in red has not been scanned. Allow the scan to continue until the entire band has been scanned. Once a full cycle has been completed, press menu/ select again to pause the...
M2r lectrosonics, inc. 10 flex list flexlist allows the user to set up a list of profiles, by name, to quickly and easily listen to any of the mixes on site individually. Listen - choose a mix from the list and hear what is transmitting add - add a mix to the available flex list (action performed vi...
Digital iem receiver rio rancho, nm 11 limiter limiter function allows the user to set volume and dynamic range for headphone use. Gain - the default setting (0) is linear, but if additonal volume is needed, use the up and down arrows to adjust the audio by up to +18 db in 3db steps. Warning: increa...
M2r lectrosonics, inc. 12 system setup procedures summary of steps 1) install receiver batteries. 2) power unit on with on/off and volume knob. 3) scan for an available frequency. 4) sync the receiver with a transmitter. 5) enable rf in transmitter. 6) send audio. 1 and 2) install receiver batteries...
Digital iem receiver rio rancho, nm 13 accessories 26895 wire belt clip. 21926 usb cable for firmware updates specifications operating spectrum: 470.100 - 614.375 mhz modulation type: 8psk with forward error correctionoccupied latency: digital source: 1.0 ms over dante network analog source: audio p...
M2r lectrosonics, inc. 14 wireless designer software and usb driver windows installation download the wireless designer software installer from the web sites under the support tab at: http://www.Lectrosonics.Com/us http://www.Lectrosonics.Com/europe/ or use the flash drive supplied with the receiver...
Digital iem receiver rio rancho, nm 15 wireless designer software and usb driver software for mac ® os x operating systems installation using only the firefox web browser, open wireless designer. If the firefox silverlight plugin has not been used before you will be prompted to “activate silver- lig...
M2r lectrosonics, inc. 16.
Digital iem receiver rio rancho, nm 17 service and repair if your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equip- ment needs repair. Make sure you have followed the setup procedure and operating instructions. Check the inter- connecting cab...
15 december 2017 limited one year warranty the equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from an authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or sh...
