Led Lenser F1R Operating Instructions Manual - page 13
Led Lenser®
*
EN Operating instructions F1R_V.01 | 7/31/2014
13
5.1 Switching the Flashlight On or Off
The flashlight is operated by pressing the push button on the
end cap.
The push button can be engaged for constant illumination; just
a gentle activation can be used to create flashes, for example,
to send signals or warnings.
1. To switch the flashlight on firmly press the On/Off push
button ② in the end cap ① and engage.
→
The push button engages with an audible "click".
→
The flashlight is now constantly lit.
2. To switch the flashlight off press the On/Off push button
② in the end cap ① again and release.
→
This On/Off push button unlocks with an audible
"click".
→
The flashlight is no longer lit.
3. To create light signals, press the On/Off push button ②
in the end cap ① gently and, if need be, hold.
5.2 Using the Lighting Functions
The flashlight offers 3 lighting functions:
1 = High Power
2 = Power (normal) and
3 = Low Power (dimmed).
1. In order to use the lighting functions, either press and
engage the On/Off push button ②
-
multiple times or gently press several times and when
the desired program has been located, press firmly to
engage.
→
Each time you press the switch, you activate the next
lighting function.
→
After more than 3 gentle button pushes, the cycle
returns to the beginning.
Press the push button
Light function
1 x
High Power
2 x
Power (normal)
3 x
Low Power (dimmed)
2
1
2
1
5. Operation
1 x
2 x
3 x