Ledco Easy RGB(Y) User Manual - page 7
pressing function button
that we define it as
MASTER receiver. The purpose of learning these two kinds of receivers is to ensure
the receivers and color changing synchronously to avoid the color changing out of
order.
This point will be noted later.
4.3 Delete ID and ID re-learning
If you need to delete the ID learned in the receiver, press ID learning
button
for more than 5 seconds, when learning indicator is off, then the
learned ID is deleted. If you need the receiver learn a new ID, repeat the
operation of 4.2 (Receiver learning ID).
4.4 Choose color by touching color wheel
After the receiver learned the ID, you can change each receiver’s color
by touching color wheel. If you want to change the color of receiver NO.1..
Press button
, then make
rotating touch on color wheel
by
your figures, at this time, the color of receiver No.1 will be changed
constantly , when your favorite color appears, stop rotating and leave the
color wheel
.
If you need change color of several receivers at the same, just choose a
number for these several receivers first, then touch color disc
. For
example, change color for receivers NO.1, 2, 3,4,5,6 at the same time, you
7