Ledj LEDJ255 User Manual - page 3

 LEDJ Intense 19T3 RGB LED Slim Panel 

                           Safety

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused 

by the non-observance of this manual or any unauthorised modification to the

equipment.

• Never let the power-cable come into contact with other cables. Handle the power-cable 

  and all mains voltage connections with particular caution!

• Never remove warning or informative labels from the equipment.

• Do not open the equipment and do not modify the equipment.

• Do not connect this equipment to a dimmer-pack.

• Do not switch the equipment on and off in short intervals, as this will reduce the 

  system’s life.

• Only use the equipment indoors.

• Do not expose to flammable sources, liquids or gases.

• Cleaning must be done at regular intervals.

• Before cleaning, wait until the unit has cooled.

• Use a vacuum or dry compressed air and a soft brush to remove the dust collected on the 

  external vents and accessible internal components.

• Clean the external surfaces with a mild solution of non-ammonia glass cleaner or 

  isopropyl alcohol and wipe with a soft, lint free cotton cloth or lense cleaning tissue.

• Always disconnect the power from the mains when equipment is not in use or before 

  cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the 

  power-cable.

• Make sure that the available voltage is between 100V/240V.

• Make sure that the power-cable is never crimped or damaged. Check the equipment and 

  the power-cable periodically.

• If the equipment is dropped or damaged, disconnect the mains power supply immediately. 

  Have a qualified engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic temperature fluctuation (e.g. after 

  transportation), do not switch it on immediately. The arising condensation might damage 

  the equipment. Leave the equipment switched off until it has reached room temperature.

• If your product fails to function correctly, discontinue use immediately. Pack the unit 

  securely (preferably in the original packing material), and return it to your Prolight dealer 

  for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be carried out by a qualified 

  technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.

• WARRANTY; One year from date of purchase.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual,

the product may suffer damage and the warranty becomes void.

Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks, 

LED failure etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and property.