Ledj LEDJ96 User manual

Manual is about: Black White

Summary of LEDJ96

  • Page 1

    W w w . P r o l i g h t . C o . U k rgba spectra batten order code: ledj96 - black order code: ledj96a - white user manual.

  • Page 2

    1 warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - f...

  • Page 3

    2 ledj rgba spectra batten safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and...

  • Page 4

    3 you should find inside the ledj carton the following items : 1, rgba spectra batten unit 2, instruction manual 3, power cable technical specifications: dmx channels: 2, 3, 4, 6, 7 or 19 selectable 400hz refresh rate power supply: 110-240v ~ 50/60hz 252 x 10mm leds (r: 48, g: 72, b: 72, a: 60) opti...

  • Page 5

    4 ledj rgba spectra batten operation operation modes sound active mode: to activate the unit in sound active mode, press the “mode” button to show “sound mode” on the lcd screen. Now press the “enter” button to select the desired sensitivity level by using the “up” and “down” buttons. Press the “ent...

  • Page 6

    5 static colour selection: to select a static colour press the “mode” button to show “01.Static” on the lcd screen. Now press the “enter” button to select the desired colour and use the “up” and “down” buttons to increase or decrease the brightness of each individual colour, for example for red and ...

  • Page 7

    6 optional i.R remote functions (ledj90c) button functions: the “blackout” button is used to set the leds into the power on or off modes. The “s pr” button is used to run the built-in programmes. To go though the built-in programmes, press the “+” and “-” buttons. The “fl” button is used to set the ...

  • Page 8

    7 2 channel dmx chart 3 channel dmx chart 4 channel dmx chart 6 channel dmx chart 7 channel dmx chart ledj rgba spectra batten dmx charts ch1 red 0-255 ch2 green 0-255 ch3 blue 0-255 ch4 amber 0-255 ch5 master dimmer 0-255 ch6 0 = on 1-5 = sound 6-10 = on 11-255 = flash channel channel channel 1 1 1...

  • Page 9

    8 19 channel dmx chart ledj rgba spectra batten dmx charts dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as ser...

  • Page 10

    9 dmx linking: • dmx is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are dmx compliant. To ensure proper dmx data transmission, when using several dmx fixtures try to use the ...

  • Page 11

    10 optional case (case29): notes: ledj rgba spectra batten optional case.

  • Page 12

    11.