Ledj Q Colour LEDJ210 User Manual - Q Colour User Manual
www.prolight.co.uk
Q Colour User Manual
4
Technical specifications & operating instructions
01 - Fuse: T2A 250V
02 - IEC power input
03 - IEC power output
04 - Earth point
05 - 3-Pin DMX input
06 - 3-Pin DMX output
07 - LED display
08 - MODE button
09 - UP button
10 - DOWN button
In the box: 1 x fixture,
1 x power cable &
1 x user manual
www.prolight.co.uk
MODE
DMX INPUT
POWER INPUT/OUTPUT:100-240V~50/60HZ
FU
SE: T2A 250V
DMX OUTPUT
DOWN
UP
02
09
10
08
03
01
04
05
07
06
DMX address mode:
To access static mode press “MODE” until the display shows
Add
on the LED display and use the
“UP” and “DOWN” buttons to select the DMX address required
001
~
512
.
To exit out of any of the above options, press the “MODE” button.
DMX channel mode:
To access static mode press “MODE” until the display shows
4CH
on the LED display and use the
“UP” and “DOWN” buttons to select one of the between 4 or 6 channel modes.
To exit out of any of the above options, press the “MODE” button.