Ledj Q Colour LEDJ210 User Manual - Q Colour User Manual
www.prolight.co.uk
Q Colour User Manual
5
Static colour mode:
To access static mode press “MODE” until the
display shows
C01
on the LED display and use
the “UP” and “DOWN” buttons to select one of the
15 colours
C01
~
C15
. To exit out of any of the above options, press the “MODE” button.
Built-in program mode:
To access the fixtures built-in programs press “MODE” until the display shows
P01
on the LED display
and use the “UP” and “DOWN” buttons to select one of the 9 built-in programs
P01
~
P09
.
To exit out of any of the above options, press the “MODE” button.
Slave mode:
Press the “MODE” button on the rear of the unit to show
Add
on the LED display and use the
“UP” and “DOWN” buttons until the display shows
001
the unit will now run in sequence with
the master unit. To exit out of any of the above options, press the “MODE” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access sound active press “MODE” until the display shows
S99
on the LED display and use the
“UP” and “DOWN” buttons to select the sensitivity level
S00
~
S99
.
(S00 - low sensitivity, S99 - high sensitivity).
To exit out of any of the above options, press the “MODE” button.
RGB colour mixing:
To select the RGB colour mixing mode, press the “MODE” button to show
r--
on the LCD display.
Now press use the “UP” and “DOWN” buttons to select the amout of red required. Press the “MODE”
button and repeat for Green, Blue and White (00-99).
To exit out of any of the above options, press the “MODE” button.
Operating instructions
Channel
Value
Function
1
000-255 Red (0-100%)
2
000-255 Green (0-100%)
3
000-255 Blue (0-100%)
4
000-255 White (0-100%)
4 channel mode:
Channel
Value
Function
1
000-255 Red (0-100%)
2
000-255 Green (0-100%)
3
000-255 Blue (0-100%)
4
000-255 White (0-100%)
5
000-255 Master dimmer (0-100%)
6
000
DMX control CH1-CH5
001-005 15 colour sound active
006-010 DMX control CH1-CH5
011-255 Strobe (slow-fast)
6 channel mode:
C01
- Red
C02
- Green
C03
- Blue
C04
- White (W)
C05
- Yellow
C06
- Purple
C07
- Cyan
C08
- White (RGB)
C09
- Pink
C10
- Light Green
C11
- Light Blue
C12
- Light Yellow
C13
- Magenta
C14
- Light Cyan
C15
- White (RGBW)
P01
7 colour change
P04
3 colour fade
P07
15 colour change
P02
7 colour fade
P05
7 colour sound active
P08
15 colour fade
P03
3 colour change
P06
3 colour sound active
P09
15 colour sound active