Ledj Razor Beam User Manual - Operating Instructions
www.prolight.co.uk
Razor Beam User Manual
6
Operating instructions
DMX channel mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to
customising or creating a show. In this mode you will be able to control each individual trait of the fixture
and each fixture independently.
To access the DMX channel mode, press the “MODE” button on the rear of the unit to show
d.---
on the LED display. Now press the “SETUP” button twice and the channel mode will be displayed.
Use the “UP” and “DOWN” buttons to choose one of the 3, 5, or 9 DMX channel modes. Press the
“SETUP” button again, the display will now display
d.001
. Use the “UP” and “DOWN” buttons to set
the DMX channel.
To exit out of any of the above options, press the “MODE” button.
Channel
Value
Function
1
0-19
Blackout
20-29
Program 1
30-39
Program 2
40-49
Program 3
50-59
Program 4
60-69
Program 5
70-79
Program 6
80-89
Program 7
90-99
Program 8
100-109 Program 9
110-119 Program 10
120-139 Blackout
140-255 Sound active (adjustable sensitivity)
2
0-255
Speed control active when CH1 value is 20-119
3
0-19
No function
20-255
LED strobe active when CH1 value is 20-119
Does not control sound active mode
3 channel mode:
5 channel mode:
Channel Value
Function
1
000-255 LED 1 (0-100%)
2
000-255 LED 2 (0-100%)
3
000-255 LED 3 (0-100%)
4
000-255 LED 4 (0-100%)
5
000-255 LED 5 (0-100%)