Ledj Spectra Batten User Manual

Summary of Spectra Batten

  • Page 1

    Www.Prolight.Co.Uk pro rgb spectra batten 1.0m (order code: ledj75b) user manual.

  • Page 2

    Ledj pro rgb spectra batten safety warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equ...

  • Page 3

    Ledj pro rgb spectra batten safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable an...

  • Page 4

    Ledj pro rgb spectra batten over view over view: operation: after the power is switched on, press the “mode” button to activate the main menu: built-in programmes mode, auto run mode, dmx mode, slave mode or sound active mode. “setup” button is to change the settings of the current mode. “up” button...

  • Page 5

    Ledj pro rgb spectra batten dmx address setting static colour selection mode to activate the the static colour selection mode on the pro rgb spectra batten, press the “mode” button to show “c---” in the led screen. Now by using the “up” and “down” buttons choose one of the following 4 options: 1, “c...

  • Page 6

    Ledj pro rgb spectra batten dmx values sound active mode: to activate the sound active mode, press the “mode” button to select “su00”, now the sound mode is activated it will run one step at a time, you can adjust the sensitivity by using the “up” and “down” buttons. (sensitivity: 00 - 99, 00 = low,...

  • Page 7

    Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...

  • Page 8

    Ledj pro rgb spectra batten specifications spectra batten specifications: dmx channels: 12 leds: 27 ultra bright 1w leds (r: 9, g: 9, b: 9) beam angle: 30 degrees 3 pin female xlr socket and 3 pin male xlr socket iec power in and power out sockets linkable via 3-pin xlr cable built-in microphone bla...