Ledj Spectra Batten User Manual - page 4
LEDJ Pro RGB Spectra Batten
Over view
Over view:
Operation:
After the power is switched on, Press the
“MODE” button to activate the main menu:
Built-in programmes mode, Auto run mode, DMX mode, Slave mode or Sound active mode.
“SETUP” button is to change the settings of the current mode.
“UP” button is to increase the value of the current setting.
“DOWN” button is to decrease the value of the current setting.
Built-in programmes mode:
With the LEDJ Pro RGB Spectra Batten, you can select any one of seven different
built-in programmes.
First press the
“MODE” button to show “P---” in the LED display. Then by using the “UP” and
“DOWN” buttons you can select one of the following 7 built-in programmes.
1,
“P100” = Colour change > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
2,
“P200” = Colour chase > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
3,
“P300” = Colour Fade > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
4,
“P400” = Multi-colour chase > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
5,
“P500” = Fading flow > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
6,
“P600” = Two colour flow > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
7,
“P700” = Flash > Speed adjustment > 00-99 (00 = slow, 99 = Fast)
Once you have made your choice press the
“SET UP” button to confirm the setting.
POWER IN
FUSE 1A
DMX OUT
DMX IN
LED SCREEN
SET UP
MODE
DOWN
UP
POWER OUT