Loc8tor Loc8tor GPS Instruction Manual - page 6
Loc8tor GPS Instruction Manual ©2014 Loc8tor Ltd.
6
How to Use the Loc8tor GPS Panel
The panel provides all the information you need to see where your device has been and where it’s going. The
Loc8tor Tracking panel is designed for beginners and for advanced users. The more time you spend using the
panel, the more you will familiarise yourself with the settings and the easier it’ll become.
Top Menu Guide
View All
If you’ve got multiple GPS devices you can select which device you want to monitor
Commands
Enables you to change the frequency your device reports its location. For example every 10
seconds or once an hour.
Admin
Rename your device, insert contact details to be notified and general settings to customise
device
Locate
Will send a command to your GPS to reports its location.
Zones
Lets you set up predefined areas. When your device enters or leaves these areas you will
automatically be notified by text. To Setup :
1.
Click on the map where you want your zone to be.
2.
Then click on the Zone button in top menu.
3.
A pop up box will appear. In the bottom right hand corner click add zone.
4.
Enter the name for the zone i.e. Park.
5.
In contact field delete the example number and enter your mobile number.
This should be written as +44 than your mobile number. Leave off the first zero i.e.
+44 123.
6.
Use the slider at bottom of box to make area larger or smaller.
Histor
Select the date you wish to review the movements of the GPS device. Review and watch re-
plays of where your device was, when and how fast it was travelling
Find
Enter in the location or place you want to find and the map will zoom in on it
Logout
Takes you back to the Loc8tor website.